Have you been considering upgrading your kitchen or bathroom with sleek stainless steel sheets? Gluing stainless steel sheets to the wall can be a great way to give your space a modern and polished look. But how do you go about it? If you’re unsure of where to start, don’t worry! We’ve got you covered. In this guide, we’ll walk you through the step-by-step process of how to properly glue stainless steel sheets to the wall, including necessary materials and preparation techniques. Let’s get started!
Materials Needed
When it comes to materials needed for gluing stainless steel sheets to the wall, you will need a few essential items. Firstly, you will need a high-quality glue that is suitable for stainless steel materials. Epoxy or wood glue could work, but it’s recommended to use a specific glue that is made for stainless steel materials. You can find stainless steel glues at most hardware stores. Not sure what type of glue to use? Check out this article to learn more about different types of glues.
Another essential tool that you will need is a caulk gun to dispense the glue uniformly and accurately onto the stainless steel sheets. Along with a caulk gun, you will need a tape measure to measure the surface area of the wall that you are planning to cover with stainless steel sheets. A level is also important to ensure that the stainless steel sheets are installed evenly.
A carpenter’s square is necessary to mark precise angles and ensure that the stainless steel sheets are cut to the correct shape. You may also need fiberglass mesh tape to cover any gaps or areas where the stainless steel sheets may not fit perfectly.
A silicone sealant is useful for sealing any gaps between the stainless steel sheets and the wall, making the installation more secure and waterproof. Lastly, you will need clamps to hold the stainless steel sheets in place while the glue is drying.
It’s essential to have all the necessary tools and materials before beginning the installation process. This will ensure that the process is smoother and easier. In case you will ever need to glue other materials, check out these articles How to Glue Cracked Glass, How to Glue Metal to Concrete, How to Glue Stone, Glue That Stays Sticky When Dry and others on our website.
Glue
When it comes to gluing stainless steel sheets to a wall, choosing the right adhesive is crucial for proper adhesion and longevity of the installation. The best glue for stainless steel sheets is a two-part epoxy-based adhesive that is specifically designed for metal bonding, such as corian countertops or pot metal. This type of glue offers high bond strength, durability, and resistance to water and heat. Additionally, it sets quickly and has a long working time, giving you enough time to adjust the sheets’ positioning before it dries.
Caulk gun
One of the essential materials you will need for gluing stainless steel sheets to the wall is a caulk gun. A caulk gun is a handheld tool that is used for dispensing and applying caulk or other sealants. It makes the job easier and ensures that you can apply the glue evenly.
When selecting a caulk gun, you should choose one that is compatible with the type of adhesive you plan to use. Some adhesives require different guns because of their viscosity and texture. Check the product instructions or consult with the manufacturer to ensure that you have the right type of caulk gun that will work for you.
Another feature to look for when selecting a caulk gun is the size. The size of the caulk gun determines the amount of glue it can hold, so choose one that suits your project’s size. A smaller gun may work if you’re only doing a small project, but a larger gun may be necessary for more extensive projects.
When using a caulk gun, it’s essential to have a steady hand. Squeeze the trigger slowly and steadily to achieve an even flow of adhesive. Insert the adhesive tube into the gun and cut the nozzle to the desired size for the job.
As you begin to apply the glue to the back of the stainless steel sheet, make sure that it’s evenly distributed throughout the surface. This will help to ensure that the sheet will stick properly to the wall. You can also use a caulk finishing tool to smooth out the glue and remove any excess for a professional finish.
A caulk gun is a must-have tool for anyone looking to glue stainless steel sheets to the wall. It’s a simple tool to use, and it helps to ensure that the adhesive is applied evenly for better adhesion. Remember to choose the appropriate size and type of gun as instructed by the adhesive manufacturer to achieve the best results.
For more information on gluing different types of materials, see our guides on:
- How to Glue Shells to a Mirror
- How to Glue Pot Metal
- How to Glue Bakelite
- How to Glue a Lawn Mower Seat Back On
Tape measure
When preparing to glue stainless steel sheets to a wall, having a tape measure on hand is essential. This measuring tool is used to determine the length and width of the wall, as well as the size of the stainless steel sheets needed. Here are some tips for using a tape measure for this project:
- Hold the tape measure straight: When measuring the length or width of the wall, it’s important to make sure the tape measure is held straight and not twisted. This will ensure accurate measurements.
- Take multiple measurements: To ensure accuracy, take multiple measurements of the wall and the stainless steel sheets needed. This will help you avoid mistakes and ensure an optimal fit.
- Mark measurements: Once you have determined the measurements, use a pencil or marker to mark the measurements on the wall and stainless steel sheets. This will help you keep track of the measurements as you cut the sheets and apply them to the wall.
- Double-check measurements: Before cutting the stainless steel sheets, double-check the measurements of both the wall and the sheets. This will help ensure that the sheets fit properly and minimize the need for adjustments.
By following these tips and utilizing a tape measure, you can ensure the accurate and precise installation of stainless steel sheets on your wall.
Level
A level is an essential tool needed to ensure that your stainless steel sheets are installed perfectly straight. You can use a standard bubble level or a laser level. Either way, make sure that the level is long enough to span the length of the metal sheet.
When using a bubble level, make sure to place it horizontally across the sheet to ensure that it is perfectly level. You can adjust the height of the sheet or use shims to make sure it is level.
Alternatively, a laser level projects a straight line of light that can be used to ensure that the sheet is level. Simply turn on the laser and adjust the height of the sheet until the laser line is straight across.
To summarize, using a level helps ensure that your stainless steel sheets are installed straight and of professional quality. Take the time to utilize this tool properly and your installation will look more polished.
Here’s a table highlighting some key points about using a level:
| Pros: | Ensures level installation | Helps prevent crooked sheets |
|---|---|---|
| Cons: | May require adjustment | May take extra time to use |
| Types: | Bubble level | Laser level |
Carpenter’s square
A carpenter’s square is an essential tool for any DIY enthusiast looking to glue stainless steel sheets to the wall. This tool is designed to help ensure that all of your measurements are precise and that your stainless steel sheets are cut to the correct size.
The carpenter’s square is essentially a flat, L-shaped metal tool that comes in a variety of sizes. It typically features measurements on both sides and is fabricated from a sturdy metal material, such as aluminum or steel, to ensure durability and longevity.
Using a carpenter’s square, you can easily measure and mark the stainless steel sheets before cutting them to the desired size. This tool is perfect for making straight cuts and can also be used to draw precise 90-degree angles for corners.
To get the most out of your carpenter’s square, be sure to use it correctly. This means holding it securely against the edge of the stainless steel sheet to ensure an accurate measurement. You can also use the carpenter’s square to check that the edges of your stainless steel sheets are straight and even, which is essential for achieving a seamless finish when gluing the sheets to the wall.
With the help of a carpenter’s square, you can rest assured that your stainless steel sheets will be accurately measured and cut to size, leading to a professional-looking finish. Remember to handle the carpenter’s square with care to avoid any damage, ensuring it will remain a vital tool in your DIY toolkit for years to come.
Fiberglass mesh tape
Fiberglass mesh tape is an essential material that will help create a sturdy and smooth surface for the stainless steel sheet to adhere to. Here are some important things to know about fiberglass mesh tape:
- It reinforces the joint: Fiberglass mesh tape is designed to reinforce joints and prevent cracks from forming around the edges of the stainless steel sheet.
- It is self-adhesive: The tape has an adhesive coating on one side that makes it easy to stick to the wall before gluing the stainless steel sheet to the surface.
- It is easy to apply: The fiberglass mesh tape can be cut to the desired length and applied to the joint in a matter of minutes. It’s a quick and easy step that can make a big difference in the final result!
- It is compatible with most glues: Fiberglass mesh tape is designed to work well with most types of glue, making it a versatile material to have on hand for any wall installation project.
- It creates a smooth surface: Once the tape is applied and the glue dries, the joint will be smooth and flat. This will help give the finished result a professional and polished look.
Fiberglass mesh tape is an essential material to have on hand when installing stainless steel sheets on walls. It reinforces the joint, is easy to apply, and creates a smooth surface for the stainless steel sheet to adhere to. Be sure to include it in your list of necessary materials before beginning your project.
Silicone sealant
When it comes to gluing stainless steel sheets to the wall, using silicone sealant is a crucial step that should not be overlooked. Silicone sealant is a highly versatile adhesive that is commonly used in construction and home improvement projects. It provides a strong and durable bond and is resistant to water and heat, making it perfect for use in areas that are exposed to moisture or high temperatures.
Benefits of Using Silicone Sealant
Silicone sealant is an excellent choice for bonding stainless steel sheets to the wall for several reasons. First and foremost, it is highly flexible and can expand and contract without losing its adhesion. This means that it can withstand the natural movements that occur with changes in temperature and humidity levels, which can cause other types of adhesives to crack or break over time.
Silicone sealant is waterproof and can effectively seal any gaps or joints between the stainless steel sheets and the wall. This is important because even the smallest gap can allow moisture to seep in, which can lead to mold growth and other problems down the line. By sealing the gaps, you can ensure that your stainless steel sheets will remain firmly attached to the wall and look great for many years to come.
How to Apply Silicone Sealant
Applying silicone sealant is a relatively straightforward process. First, you need to make sure that the surface is clean and free from any dirt or debris. Then, using a caulking gun, apply the silicone sealant along the edges and joints where the stainless steel sheets meet the wall. Be sure to apply enough sealant to fill any gaps or cracks.
Once the sealant has been applied, use a smooth tool or your finger to gently smooth out the sealant and remove any excess. This will ensure a neat and professional-looking finish. Allow the sealant to cure and dry according to the manufacturer’s instructions before proceeding with any further steps.
Precautions when Using Silicone Sealant
While silicone sealant is a great adhesive, it is important to take some precautions when using it. First, make sure to wear gloves to protect your hands from the sealant, which can be difficult to remove once it dries. Additionally, be sure to use the sealant in a well-ventilated area to avoid inhaling any fumes. Finally, be patient and allow the sealant ample time to cure and dry fully before proceeding with any further steps.
| Pros | Cons |
|---|---|
| Flexible and can withstand movements and temperature changes. | Requires a caulking gun and a steady hand to apply properly. |
| Waterproof and can effectively seal gaps and joints. | Drying time can be longer than other types of adhesives. |
| Highly durable and can provide a long-lasting bond. | Can be difficult to remove once it dries. |
Silicone sealant is an excellent choice for gluing stainless steel sheets to the wall. It provides a strong and durable bond, is highly flexible, and can effectively seal any gaps or joints. With the right application technique and a bit of patience, you can achieve a professional-looking finish that will last for many years.
Clamps
Clamps: Clamps are an essential tool for gluing stainless steel sheets to the wall. They help hold the sheets in place until the glue dries. There are different types of clamps available in the market, but you should choose the ones that are suitable for your project.
| Type of Clamp | Usage | Advantages | Disadvantages |
| Spring Clamps | Used for lightweight stainless steel sheets | Easy to use, inexpensive | Not suitable for heavy-duty applications |
| C-Clamps | Used for a range of projects, including heavier stainless steel sheets | Sturdy, versatile | Can leave marks on the stainless steel surface if not used carefully |
| Pipe Clamps | Used to clamp multiple stainless steel sheets together | Strong, reliable | Can be expensive, not suitable for small projects |
Before starting the project, make sure to have enough clamps to hold the stainless steel sheets in place. Place the clamps along the edges and the center of the sheet, ensuring that they are evenly spaced and applying enough pressure to hold the sheets securely in place. It’s important to use caution with the clamps, as they can leave marks on the stainless steel surface if not used correctly.
Using the correct clamps is crucial for a successful installation of stainless steel sheets. Consider the size and weight of the sheets and choose the appropriate clamps that will provide enough support for the duration of the drying time. So, be sure to carefully select the right type of clamp that matches your project’s specifications.
Preparation
Preparing the area for gluing the stainless steel sheets to the wall is an essential step that can make or break the success of the entire project. Without proper preparation, the glue may fail to adhere properly, and the finished result may look unprofessional. To ensure a smooth and seamless installation, it’s important to carefully follow the steps outlined below. Keep reading to learn about the materials you’ll need and how to prepare the surface for gluing the stainless steel sheets to the wall.
Step 1: Measure the Wall
Before starting the gluing process, it is essential to take accurate measurements of the wall where you plan to place the stainless steel sheets. This will ensure that you have the correct dimensions for your sheets and can also help you determine how many sheets you will need.
Here are the steps to measure the wall:
| Step | Instructions |
| 1 | Use a tape measure to determine the length and height of the wall where you plan to install the stainless steel sheets. (Avoid measuring the baseboards, as they might not be straight) |
| 2 | Write the measurements down on a piece of paper in both imperial and metric units, as you will be using them throughout the project. |
| 3 | Check if the measurements you have taken are level by using a level tool against the wall. If the wall is not level, you’ll need to make adjustments during the cutting of the stainless steel sheets. |
| 4 | Use a carpenter’s square to ensure that the corners of the wall are square. If they’re not square, adjust the measurements accordingly. |
By taking accurate measurements, you will ensure that the sheets of stainless steel fit correctly on the wall and minimize the risk of wastage. Always double-check the measurements before cutting the stainless steel sheets to ensure a perfect fit.
Step 2: Cut the Stainless Steel Sheets
Once you have measured the wall and have your stainless steel sheets, the next step is to cut them to the appropriate size and shape. This step is crucial in ensuring a perfect fit and a seamless appearance. Here are the steps to take:
- Measure Twice, Cut Once: Before cutting the stainless steel sheets, double-check your measurements to avoid potential mistakes that could result in unwanted gaps or overlap.
- Mark the Sheet: Use a carpenter’s square and a tape measure to mark the area where you need to cut on the protective film. Make sure the measurements are accurate and perfect. Use a marker to make the cut lines visible.
- Secure the Sheet: Place the stainless steel sheet on a flat surface, such as a workbench or sawhorses, and ensure it’s securely in place with clamps.
- Cut the Sheet: Carefully cut along the marked lines using a metal cutting saw or a jigsaw equipped with metal cutting blades. Cut slowly and steadily while following the line precisely, making sure to remove any jagged or rough edges after cutting.
- Smooth the Edges: Use sandpaper or a metal file to smooth out any rough edges or burrs along the cut edges of your stainless steel sheets. This will create a clean and professional-looking finish and prevent injury while handling.
By following these steps, you will be able to cut your stainless steel sheets to the correct size and shape, ensuring that they fit snugly against the wall without any unwanted gaps or overlap. Make sure to have the necessary tools and take your time while cutting and smoothing out the edges to create a clean and seamless appearance.
Step 3: Prepare the Surface
Before gluing the stainless steel sheets to the wall, it’s crucial to prepare the surface properly to ensure a sturdy and long-lasting installation. Here are the steps that you need to follow for preparing the surface:
Clean the Wall
The first step is to clean the wall properly. Use a detergent or soap to remove any dirt, grease, or dust from the surface. Make sure the wall is completely dry before moving to the next step.
Find the High Spots
After cleaning the wall, use a level tool to find the high spots. High spots are the areas of the wall that are not level and protrude outwards. If you glue the stainless steel sheets on the high spots, the sheets will not be levelled, which will create an unattractive and uneven look.
Mark the High Spots
Use a pencil to mark the high spots on the wall. This step is important to have an idea of where to apply more glue. You have to ensure that the stainless steel sheets stick evenly to the wall, even if you have to put more glue on certain areas.
Install the Fiberglass Mesh Tape
Now, it’s time to install the fiberglass mesh tape. Apply the tape to any gaps or cracks on the wall. The tape will act as a reinforcement and prevent the glue from seeping into the gaps. It will also help to level and smoothen the surface.
Apply the Sealant
Use a silicone sealant to seal the edges of the wall where the stainless steel sheets will be placed. This will prevent water from seeping behind the sheets and causing damage. Keep in mind that the sealant should only be applied to the edges and not the entire surface.
By following these preparation steps, you will ensure the surface is ready for gluing. Skipping this step will leave you with a weak installation that can fall apart easily.
Gluing the Stainless Steel Sheets to the Wall
Now that you have prepared the surface and cut the stainless steel sheets to size, it’s time to glue them to the wall. This can be a delicate process, but if you follow these steps, you’ll have your stainless steel sheets securely attached in no time. Be sure to take your time and follow each step carefully to ensure a smooth and successful installation. Here’s a step-by-step guide on how to glue stainless steel sheets to the wall.
Step 1: Apply Glue to the Back of the Stainless Steel Sheet
Before applying the glue, make sure that the surface of the stainless steel sheet is clean and dry. Use a cloth to wipe off any dirt or debris. Once the surface is clean, apply the glue to the back of the stainless steel sheet in a zigzag pattern. This will ensure that the glue is spread out evenly, and will create a stronger bond between the sheet and the wall.
Use a glue that is specifically designed for bonding stainless steel to a vertical surface, as using the wrong type of glue can result in the sheets falling off the wall. Some recommended glues for this type of project include liquid nails or epoxy adhesives.
When applying the glue, make sure to leave a small gap around the edge of the sheet to allow room for the silicone sealant. This will prevent any gaps or cracks from forming between the sheet and the wall.
Once the glue has been applied, carefully lift the sheet and align it with the measurement marks made on the wall. This ensures that the sheet is level and properly positioned before it is pressed against the wall.
Be sure to use caution when handling the sheet as the glue may make it heavy and difficult to lift. Have a second person assist you if necessary.
In the next step, we will discuss how to properly press the sheet against the wall for a long-lasting bond.
Step 2: Press the Sheet Firmly Against the Wall
Once you have applied the glue to the back of the stainless steel sheet, it’s time to press it firmly against the wall. This step is critical for ensuring a strong and secure bond between the stainless steel sheet and the wall. Using the appropriate technique and tools will guarantee the best results.
Tools Needed:
| Tools | Quantity |
|---|---|
| Silicone roller | 1 |
| Clean cloth | 1 |
Steps to Follow:
- Starting from the top, carefully line up the stainless steel sheet with the measurements you took earlier.
- Once the sheet has been positioned correctly, press it firmly against the wall using your hands. Begin at the center of the sheet and work your way outwards towards the edges.
- Use a silicone roller to roll over the surface of the stainless steel sheet, applying even pressure. This will help to remove any air pockets that may be trapped behind the sheet.
- Continue rolling until you reach the edges of the sheet, making sure that it is fully adhered to the wall.
- If there are any areas where the sheet is not sticking properly, use your hands to apply pressure and press the sheet against the wall.
- After pressing the sheet, use a clean cloth to wipe away any excess glue that may have seeped out from behind the sheet.
Tips:
- If possible, have someone help you with this step. They can hold the sheet in place while you press it against the wall.
- Make sure the sheet is level – if it isn’t level it will cause problems and gaps later on.
- Be patient during this step, applying too much pressure at once can cause the sheet to move, which will ruin the placement and cause gaps or misalignments to occur.
By following these steps, you can be confident that your stainless steel sheets have been securely attached to the wall. The next step is to use clamps to hold the sheet in place while the glue dries, which will ensure a strong and lasting bond.
Step 3: Use Clamps to Hold the Sheet in Place
Once you have applied the glue to the back of the stainless steel sheet and pressed it firmly against the wall, use clamps to hold it in place as the glue dries. This will ensure that the sheet remains secure and does not shift or slide out of place.
Here are the steps to using clamps to hold the sheet in place:
- Start by positioning the clamps along the top edge of the stainless steel sheet. Use a level to ensure that the sheet is straight and even before tightening the clamps.
- Secure the clamps by tightening them just enough to hold the sheet in place without damaging it.
- Move on to the bottom edge of the sheet and repeat the process, ensuring that the sheet remains level throughout.
- Finally, add clamps along the sides of the sheet to hold it firmly against the wall as the glue dries.
It’s important to note that you don’t want to overtighten the clamps as this can cause the stainless steel sheet to warp or become damaged. Just tighten them enough to hold the sheet securely in place.
Allow the glue to dry completely before removing the clamps. This can take anywhere from a few hours to overnight depending on the type of glue you used and the climate conditions. Once the glue is completely dry, you can remove the clamps and move on to the next step in the process.
Finishing Touches
After successfully gluing stainless steel sheets to the wall, there are still a few finishing touches to complete the project and ensure a professional-looking result. These final steps are crucial to not only make the installation look complete but also to protect the area from moisture or heat damage. In this section, we will guide you through the steps to add sealant and trim to the stainless steel sheets. These steps will make your installation look like a high-quality job that will leave your space looking brand new. Let’s dive into the final steps.
Step 1: Seal the Gaps
After gluing the stainless steel sheets to the wall, there will be gaps between the seams that need to be taken care of to achieve a clean finish. The right method to seal these gaps is to use silicone sealant. Silicone sealant is a flexible material that sticks to most surfaces, and it is resistant to heat and moisture, making it perfect for bathroom and kitchen walls. Follow the steps below to seal the gaps:
| Materials Needed: | Steps: |
|---|---|
| 1. Silicone Sealant | Step 1: Cut the tip of the silicone sealant tube at a 45-degree angle using a sharp cutter. |
| 2. Caulking gun | Step 2: Insert the tube of silicone into the caulk gun. |
| 3. Cloth or paper towel | Step 3: Squeeze the silicone out of the tube while holding the caulk gun at a 45-degree angle. Run the silicone along the gap in a smooth and continuous motion, applying pressure to the gun trigger to ensure a consistent bead of silicone. Use a cloth or paper towel to remove the excess silicone and create a smooth finish. |
| 4. Paint | Step 4: Wait for the silicone to dry, usually for a day or two. Choose a paint that matches the color of the stainless steel sheets, and carefully apply the paint over the silicone using a small brush. Let the paint dry overnight. |
By following these simple steps, you can achieve a professional-looking finish to your stainless steel sheet installation. Properly sealing the gaps will protect the sheet and ensure that it lasts for many years to come.
Step 2: Add Trim to the Edges
Once the stainless steel sheet is secured to the wall, it’s time to add trim to the edges to give it a finished look. You can use a variety of trim materials such as metal or wood. Here’s how to add trim to the edges of your stainless steel sheet:
| Materials Needed: | Instructions: |
|---|---|
| Trim material | Choose the material you want to use for your trim. Metal or wood are both good options. Measure the length and width of the edges that you want to trim. Make sure to leave a little extra material in case you need to make any adjustments. |
| Circular saw or Miter saw | Measure and mark the trim material according to the measurements you took in the previous step. Use a circular saw or miter saw to cut the trim to the correct length and angle. |
| Nails or screws | Attach the trim to the edges of the stainless steel sheet using nails or screws. Make sure to pre-drill any holes in the trim before you attach it to the sheet. |
| Sandpaper | Use sandpaper to smooth any rough edges of the trim that may be sticking out. |
| Paint or finish | If you’re using wood trim, you can paint or finish it to match the rest of the room. If you’re using metal trim, you can polish it with a metal cleaner to give it a nice shine. |
Adding trim to the edges of your stainless steel sheet is an important step in making it look professionally installed. It not only gives it a finished look but also protects the edges from damage or chipping.
Conclusion
After following this step-by-step guide on how to glue stainless steel sheets to the wall, you should have a beautiful and modern-looking wall that is incredibly durable and easy to clean. With the right materials and a little bit of patience, this project can be undertaken by DIY enthusiasts of all levels. However, it is important to remember to take necessary safety precautions during the installation process, such as wearing protective gloves and eyewear.
It is essential to use high-quality glue and sealant to ensure that the stainless steel sheets stay in place and no water or moisture can seep in through any gaps. Taking care to seal gaps and add trim to the edges will provide a professional-looking finish to the project.
Overall, this project can be a cost-effective way to update and beautify your home or business space, especially in areas like kitchens or restrooms where durability and ease of cleaning are essential. With a few simple tools and some attention to detail, you can create a stunning wall that will last for years to come.
Frequently Asked Questions
What type of glue is best for gluing stainless steel sheets to the wall?
Two-part epoxy adhesives or construction adhesives like Loctite PL Premium are ideal for this type of project.
Do I need to remove any existing tiles or wallpaper from the wall before gluing the stainless steel sheets?
Yes, all existing tiles or wallpaper need to be removed for the stainless steel sheets to properly adhere to the wall.
Can stainless steel sheets be glued directly onto drywall?
No, it is recommended to install a cement backer board over the drywall before gluing the stainless steel sheets to the wall to ensure proper adhesion.
Do I need to wear any protective gear while working with the glue?
It is recommended to wear safety gloves and protective eyewear while working with any type of adhesive.
Can I use duct tape instead of clamps to hold the stainless steel sheets in place?
No, duct tape won’t provide enough pressure to hold the stainless steel sheets in place while the glue dries.
How long does the glue take to dry?
The drying time will depend on the type of glue used, but it typically takes around 24 hours for the glue to fully dry and cure.
What can I use to cut the stainless steel sheets?
A circular saw with a metal-cutting blade or a jigsaw with a bi-metal blade can be used to cut the stainless steel sheets.
Why should I use fiberglass mesh tape?
Fiberglass mesh tape reinforces the seams between sheets and prevents cracking or shifting over time.
What type of silicone sealant should I use?
A high-quality silicone sealant designed for use with metal and used for kitchen and bathroom fixtures and fittings is recommended.
What type of trim should I use?
Use a decorative metal trim that matches the stainless steel sheets to cover any exposed edges and give the installation a finished look.