Have you ever felt the satisfaction of putting together a puzzle, only to be left with a glued mess? Removing puzzle glue can seem like a daunting task, but fear not! With a few simple tools and some patience, you can easily remove puzzle glue from your puzzle board. In this article, we’ll walk you through step-by-step on how to remove puzzle glue, and provide you with some tips and tricks along the way. So, whether you’re looking to reuse your puzzle board or want to display your completed puzzle, read on to discover how to remove puzzle glue like a pro.
Why You Need to Remove Puzzle Glue
Have you completed your puzzle and now want to reuse the puzzle board or place your puzzle on display? Well, the next step for you is to remove puzzle glue so that you can easily detach the puzzle pieces from the board. Removing puzzle glue may seem like a daunting task, but with a few tools and tricks, it can be done effectively. In this article, we will guide you through the process of removing puzzle glue step-by-step. So let’s jump right in!
For Reusing Puzzle Boards
When you complete a jigsaw puzzle that you enjoyed, you might want to keep it for future reference or as a decoration. Rather than breaking down your puzzle and throwing it away, you can reuse the puzzle board. Not only will it save money, but it’s also a great way to preserve a memory. Reusing puzzle boards can be a great way to save space and keep your puzzles in good condition for years to come.
To reuse your puzzle board, you must remove all the glue. Depending on the type of glue you used, removing it can be challenging. However, with the right tools and tips, you can remove the glue from your puzzle board quickly and easily. Below are some of the best tips and tricks for removing puzzle glue.
- Loosen the Puzzle Pieces: Before attempting to remove the glue, make sure you loosen the puzzle pieces from the board. You can do this by lifting the edges of each puzzle piece with your fingers gently. Use a scraper tool like a putty knife if the puzzle is stuck.
- Slide a Putty Knife Underneath the Puzzle: Place a putty knife or scraper tool under the puzzle piece. It is essential to be careful not to damage your puzzle during this process. Avoid lifting or pressing too much to prevent tearing the puzzle pieces.
- Gently Peel Off and Remove Any Excessive Glue: Slowly peel off the excess glue that’s sticking to the puzzle board. When using putty knife or scraper, be cautious of the amount of force you use because you don’t want to scratch the board.
- Clean the Puzzle Board with Warm Water and Soap Solution: After removing the glue, clean the puzzle board with a warm water and soap solution. Use a small amount of soap to prevent waterlogging and dry it with a clean towel.
- Dry the Puzzle Board with a Blow Dryer: To prevent water from seeping into the puzzle board, use a blow dryer to dry the surface. This step will ensure the board stays intact and last longer.
- Use Acetone or Rubbing Alcohol to Remove Any Remaining Glue Stains: If some glue stains remain on the surface, use a natural solvent like acetone or rubbing alcohol to remove them. These solvents are not toxic and are effective in removing glue stains.
Remember, when reusing your puzzle board, be gentle and take your time to avoid cracking or tearing the board. Using the right tools and being patient will help you easily remove the glue from your puzzle board. With these tips, you can enjoy your jigsaw puzzles over and over again, without having to purchase new ones.
Click here to learn about how to remove glue from a subfloor.
For Displaying the Puzzle
When you’ve finally completed that difficult puzzle, you might want to frame and display it as a beautiful work of art. However, before you can do that, you will need to remove the puzzle glue from the back of the puzzle. If you don’t remove the glue, it may cause the puzzle to warp or damage the framing material.
The removal process for displaying a puzzle is similar to reusing a puzzle board, but there are a few key differences to keep in mind. First, you will need to have a clean and flat surface to use for the puzzle. This can be a piece of cardboard, foam board, or a puzzle board that has been cleaned off.
To start, loosen the puzzle pieces by gently bending the board back and forth until they begin to come apart. Then, use a putty knife to slide underneath the puzzle and lift it off the board. Be careful not to force the pieces apart as this can cause damage.
Once the puzzle is removed, gently peel off any excessive glue left on the board. Then, clean the board with warm water and soap solution, making sure to dry thoroughly with a blow dryer. After the board is dry, use acetone or rubbing alcohol to remove any remaining glue stains.
It’s important to be gentle with your puzzle board during this process. Using a hard or sharp tool to remove the glue can damage the board or scrape off the puzzle image. If you want to preserve the puzzle for display, take the time to carefully remove the glue without damaging the board or the puzzle itself.
Removing the puzzle glue is an essential step for preserving and displaying your puzzle masterpiece. With the right tools and techniques, you can safely remove the glue and enjoy your beautiful work of art for years to come.
If you accidentally get glue on other surfaces, such as wood flooring, paper or your desk, and need to remove it, check out our articles on removing glue down wood flooring, hiding glue streaks on paper, or getting nail glue off your desk. We also have articles for removing other types of glue, such as what weakens super glue and how to remove price tag glue.
Tools You Need
Having the right tools is crucial when it comes to removing puzzle glue. You’ll need a combination of items that can help loosen the glue and gently remove it without damaging the puzzle or board. Here are some of the things you’ll need:
- A putty knife to slide under the puzzle pieces
- A warm water and soap solution
- A blow dryer to help dry the puzzle board
- Acetone or nail polish remover
- Rubbing alcohol to help remove any remaining glue stains
Using these tools properly can make the puzzle glue removal process much easier and more effective. Be sure to have these items on hand before diving into the removal process.
Putty Knife
A putty knife is a versatile tool that can be used for various household repairs and projects. When it comes to removing puzzle glue, a putty knife is a must-have tool. This flat blade knife has a handle on one end and a sharp, angled blade on the other. It is perfect for separating puzzle pieces from the board.
One of the key benefits of using a putty knife for removing puzzle glue is that it allows you to easily slide the blade underneath the puzzle without damaging it. This helps to loosen the puzzle from the board without breaking or tearing the pieces apart. When using a putty knife, it is important to use gentle force to avoid causing any damage to the puzzle.
However, it is important to note that putty knives can be sharp, so it is important to use caution when using this tool. It is recommended that you wear gloves and safety glasses when removing puzzle glue to protect your hands and eyes from any potential injury.
To use a putty knife for removing puzzle glue, you should start by gently sliding the blade underneath the puzzle. Once the knife is underneath the puzzle, you can then carefully lift the puzzle off of the board. If there are areas where the glue is still holding the puzzle together, you can use the putty knife to gently pry apart the pieces.
If you don’t have a putty knife on hand, you can also use a credit card or other flat, flexible object in its place. However, a putty knife is the most effective tool for removing puzzle glue without causing any damage to the puzzle or the board.
The use of a putty knife is just one of the many tools you will need to successfully remove puzzle glue. To learn about other tools and methods for removing puzzle glue, check out our article on how to remove glue down laminate flooring.
Warm Water and Soap Solution
Warm water and soap solution is one of the most basic and effective ways to remove puzzle glue. This method is gentle on your puzzle board, and the materials are available in most households. First, add a small amount of dish soap or gentle detergent to a bowl of warm water. Mix it well to form the soap solution. Then, gently scrub the puzzle board with a soft cloth soaked in the solution.
It is important to avoid soaking the board with too much water, as this can cause damage to the puzzle pieces or weaken the board itself. The warmth of the water will help soften the glue, making it easier to remove. Additionally, the soap helps to break down the glue and makes it easier to clean off the puzzle board.
Once you have thoroughly scrubbed the board, rinse it with clean water carefully, making sure not to submerge the board in water. After rinsing, gently pat the board dry with a clean cloth and allow it to air dry for a few hours before attempting to reuse or display the puzzle.
This method is particularly useful for removing excess glue from the puzzle board after you have removed the puzzle pieces. The gentle cleaning action of the soap and warm water solution will not damage the board or the image. However, if there are stubborn glue marks, you may need to use other tools like acetone or rubbing alcohol.
Note: Although warm water and soap solution is a very effective method to remove puzzle glue, it may not be suitable for all types of glue. If the glue label says specifically that warm water should not be used for cleaning, then it is better to skip this step and use the other methods mentioned in this article, or refer to relevant articles such as How to Kill a Rat in a Glue Trap or How to Remove RC Tire Glue for more guidance.
Blow Dryer
One of the tools that can be used to remove puzzle glue is a blow dryer. A blow dryer can be a helpful tool in removing puzzle glue because it heats up the glue and makes it more pliable, allowing for easier removal. The Blow dryer is a commonly available household item that can be found in most homes.
To use the blow dryer, plug it in and turn it on to the highest setting. Aim the hot air at the glued area of the puzzle board. Wait for a minute or two, and then begin to gently peel off the glued area. It is important to use caution when using a blow dryer as it can cause burns or fire hazards if the hot air is directed too closely to the puzzle board or surrounding area.
Using a blow dryer can speed up the process of removing puzzle glue, as the heat loosens the glue’s grip on the puzzle pieces. However, it is important to note that this method may not work on thicker or more stubborn glue stains. In these cases, it may be necessary to use a different method or tool, such as nail polish remover or rubbing alcohol.
The blow dryer can be a useful tool in removing puzzle glue, but it should be used in conjunction with other tools and methods to ensure complete removal of the glue. Additionally, it is crucial to practice caution when using the blow dryer, as it can cause harm if not used properly.
| Pros | Cons |
|---|---|
| -Heats up glue, making it easier to remove | -Can be a fire hazard if not used properly |
| -Can speed up the process of glue removal | -May not work on thicker or more stubborn glue stains |
| -Common household item | -Not the most effective tool for all situations |
Acetone or Nail Polish Remover
When it comes to removing puzzle glue, acetone and nail polish remover are powerful solvents that can help dissolve the adhesive. However, before using them, it’s important to note that these substances can cause damage to some puzzle boards and puzzle pieces, especially if they’re made of plastic or have a glossy finish. That’s why it’s recommended to test a small, hidden area first to make sure the acetone or nail polish remover won’t harm the surface.
If you decide to use acetone or nail polish remover to remove puzzle glue, it’s important to take the necessary safety precautions. These solvents are highly flammable and can be toxic if ingested or inhaled, so it’s recommended to use them in a well-ventilated area, wear gloves to protect your skin, and avoid smoking or using any open flames nearby.
To use acetone or nail polish remover for removing puzzle glue, follow these steps:
| Materials | Steps |
|---|---|
| Acetone or Nail Polish Remover |
|
Remember that acetone and nail polish remover are powerful solvents and should be used with caution. If you’re unsure about using them or are hesitant to take the risk, there are alternative methods for removing puzzle glue that are less harsh and equally effective.
Rubbing Alcohol
Rubbing alcohol is a common household item that can be used to remove puzzle glue residue. It is a powerful solvent that dissolves glue effectively, making it easier to remove the glue stains.
To use rubbing alcohol, you will need the following materials:
| Materials | Description |
|---|---|
| Rubbing alcohol | A high concentration of isopropyl alcohol that can dissolve glue effectively. |
| Cotton balls or swabs | Used to apply the rubbing alcohol onto the glue stain. |
Step 1: Dip a cotton ball or swab into the rubbing alcohol and apply it to the glue stain. Be careful not to spill it on the puzzle pieces or the board.
Step 2: Let the rubbing alcohol sit on the glue for a few minutes to allow it to dissolve the glue.
Step 3: Gently rub the glue stain with the cotton ball or swab. The glue should start to come off easily.
Step 4: Continue cleaning the glue stain with the rubbing alcohol until all the glue is dissolved.
Step 5: Once the glue is removed, use a clean cloth to wipe off any remaining rubbing alcohol from the board.
It is important to be careful when using rubbing alcohol on your puzzle board. Rubbing alcohol is flammable, and it can damage the board’s surface if it is not used properly. It can also be harmful if it comes into contact with your skin or eyes, so make sure to wear gloves and goggles while handling it.
Rubbing alcohol is an effective way to remove puzzle glue stains, but you must handle it with care. Always follow the safety guidelines when using this solvent to avoid any accidents or damage to your puzzle board.
How to Remove Puzzle Glue
Removing puzzle glue can be a tiresome task, especially if you’re unsure of the right methods. However, with the right tools and techniques, you can get rid of all the glue without causing any damage to your puzzle board. In this section, we will guide you through some easy and efficient steps on how to remove the puzzle glue from your puzzle board. Follow these steps to achieve a clean and tidy puzzle board, ready for its next use or display.
Step 1: Loosen the Puzzle Pieces
Loosening the puzzle pieces is the first step in removing puzzle glue. Follow these steps to complete this task with ease:
- Start by Gently Separating the Puzzled Pieces: You can begin by gently separating the puzzled pieces from one another. Avoid applying too much pressure to prevent ripping the cardboard or damaging the board underneath.
- Warm the Puzzle Board: You can warm the puzzle board using a hairdryer or by placing it in the sun for a few minutes. This step will loosen the pieces and make them easier to remove from the board.
- Use a Plastic Knife or a Spatula: Once the puzzle pieces are sufficiently warmed, use a plastic knife or a spatula to slowly insert it between the puzzle pieces and the board surface, lifting them with gentle pressure to loosen up the pieces. Avoid using any metal tools such as knives and screwdrivers as they may damage the board or scratch its surface.
- Increase the Warmth of the Puzzle Board as Needed: If you encounter any trouble in getting the pieces loose, increase the warmth of the board, and continue using the plastic knife to pry them off.
By following these simple steps, you will be able to loosen up the puzzle pieces with minimal effort while keeping them intact.
Step 2: Slide a Putty Knife Underneath the Puzzle
When it comes to removing puzzle glue, sliding a putty knife underneath the puzzle is an essential step. A putty knife is a thin, flat tool with a wide blade that is perfect for sliding underneath the puzzle without damaging the board. Here’s how you can do it:
| Step 1: | Make sure the puzzle is fully dry and hard. This will help prevent any tearing or damage to the puzzle pieces. |
| Step 2: | Slide the putty knife carefully underneath one side of the puzzle. Use a gentle, lifting motion to separate the puzzle from the board. |
| Step 3: | Continue sliding the putty knife underneath the puzzle along one direction until the whole puzzle is lifted slightly from the board. |
| Step 4: | Repeat the process on the other side of the puzzle, using the putty knife to lift the puzzle slightly from the board again. |
| Step 5: | Gently separate the puzzle from the board using your hands. Be sure not to apply too much pressure and avoid tearing any puzzle pieces in the process. |
During this step, it’s crucial to be patient and gentle to avoid causing any damage to the puzzle. Make sure that you’re lifting the puzzle smoothly and in one direction rather than yanking it off the board. By doing so, you can minimize the risk of ripping your puzzle or damaging your board. Once you’ve successfully used the putty knife to separate the puzzle from the board, you can proceed to remove any excessive glue on both surfaces.
Step 3: Gently Peel Off and Remove Any Excessive Glue
After you’ve successfully loosened the puzzle pieces using warm water, it’s time to remove any excessive glue that might be stuck to the surface of the puzzle board. This step is critical in restoring the board’s original appearance without any sticky residue. To do this, you’ll need a putty knife which you’ll use to gently peel off any leftover glue.
| Step 3 | Gently Peel Off and Remove Any Excessive Glue |
|---|---|
| Materials Needed | Putty Knife |
| Warm Water and Soap Solution | |
| Blow Dryer | |
| Acetone or Nail Polish Remover | |
| Rubbing Alcohol | |
| Instructions | 1. Take a putty knife and slide it gently under the edge of the glue. |
| 2. Lift the putty knife slowly and start peeling off the glue. | |
| 3. Be very careful not to damage the surface of the puzzle board while peeling off the glue. | |
| 4. If you encounter a particularly stubborn piece of glue, hold the putty knife at a slight angle and try again. Don’t apply too much force, as you run the risk of damaging the board. |
Remember to be patient during this step, as it may take some time to remove all the excess glue. Once you’ve peeled off all the glue, discard it in a bin. If you skip this step, you may end up with a board that is still sticky, making it difficult to use again.
Step 4: Clean the Puzzle Board with Warm Water and Soap Solution
After removing the puzzle pieces and excess glue, it’s important to clean the puzzle board with a warm water and soap solution to get rid of any remaining residue. Here are the steps for cleaning your puzzle board:
- Fill a small bucket or basin with warm water and add a few drops of dish soap.
- Soak a clean sponge or cloth in the soapy water.
- Gently wipe the puzzle board with the sponge or cloth.
- Pay special attention to any stubborn glue residue.
- Rinse the puzzle board with clean water.
- Dry the puzzle board with a clean towel.
It’s important to avoid using any rough or abrasive materials, as they can scratch or damage the surface of the puzzle board. A soft cloth or sponge is typically the best option for cleaning. Once you’ve washed and dried the puzzle board, it should be free from any remaining glue or dirt.
Step 5: Dry the Puzzle Board with a Blow Dryer
After cleaning the puzzle board with warm water and soap solution, the next step is to dry it properly. Drying the puzzle board with a blow dryer is an effective way to remove any excess moisture and prevent mold growth. Follow these simple steps to use a blow dryer to dry your puzzle board:
| Materials Needed: | Instructions: |
|---|---|
| Blow Dryer | Set the blow dryer to the lowest heat setting |
| Hold the dryer about 6 inches away from the board | |
| With the dryer running, move it back and forth over the puzzle board to dry it evenly | |
| Continue drying until the puzzle board is completely dry to the touch |
It is important to remember to keep the blow dryer on the lowest heat setting to prevent damage to the puzzle board. You should also make sure to hold the dryer at a safe distance of six inches or more from the board to prevent any damage from the heat. With this simple technique, your puzzle board will be completely dry and ready for use in no time!
Step 6: Use Acetone or Rubbing Alcohol to Remove Any Remaining Glue Stains
After completing the previous steps, you may still have some stubborn puzzle glue stains left on your board. In this case, you can use either acetone or rubbing alcohol to remove them. These solvents are widely available at hardware stores and some supermarkets.
Here’s how to do it:
- Apply small amounts of acetone or rubbing alcohol to a clean towel or cloth.
- Gently rub the glue stains in a circular motion until they dissolve.
- Make sure to wear gloves when using these solvents, as they can be harsh on skin and cause irritation.
- Once the glue stains have been removed, wipe off any leftover solvent with a clean, damp cloth.
It’s important to note that these solvents are harsh and may cause damage to some surfaces, so it’s crucial to test a small, inconspicuous area before applying them to the entire board. Additionally, make sure to use them in a well-ventilated area and keep them away from heat sources, as they are flammable.
Pro Tip: If you don’t have any acetone or rubbing alcohol on hand, you can also try using white vinegar or lemon juice as natural alternatives. Simply soak a clean cloth in vinegar or lemon juice and rub the stains until they dissolve, then wipe the board with a damp cloth. These natural solvents can be just as effective, with the added benefit of being gentler on your skin and the environment.
Tips for Removing Puzzle Glue
As you work to remove puzzle glue, there are a few important tips to keep in mind. These tips will help ensure that you are able to remove the glue effectively and without damaging the puzzle or board. By using natural solvents and being gentle with your puzzle, you can successfully remove puzzle glue and prepare your puzzle for reuse or display. Here are a few tips to keep in mind as you tackle this task.
Natural Solvents Are the Best
When it comes to removing puzzle glue, natural solvents are the best option to consider due to their eco-friendly properties and health benefits. These solvents are obtained from natural sources such as plants and are free from harsh chemicals that can cause harm to human health and the environment. Here is a table of some of the most effective natural solvents for removing puzzle glue:
| Natural Solvent | How to Use |
|---|---|
| Vinegar | Mix equal parts white vinegar and warm water. Soak a clean cloth in the solution and rub it on the glued puzzle pieces. Leave it for 5 minutes and then wipe with a dry cloth. |
| Lemon Juice | Mix equal parts lemon juice and warm water. Soak a clean cloth in the solution and rub it on the glued puzzle pieces. Leave it for 5 minutes and then wipe with a dry cloth. |
| Olive Oil | Apply some olive oil on the glued puzzle pieces and let it sit for a few minutes. Then use a putty knife to remove the glue. Wipe the puzzle board with a dry cloth. |
| Baking Soda | Mix baking soda and warm water to form a paste. Apply the paste on the glued area and let it sit for a few minutes. Use a clean cloth to wipe it away. |
| Citrus Oil | Apply some citrus oil on the glued puzzle pieces and let it sit for a few minutes. Use a putty knife to remove the glue. Wipe the puzzle board with a dry cloth. |
These natural solvents can be found easily in homes and are safe to use. They do not emit harmful fumes or leave any residue behind, making them an excellent choice for removing puzzle glue. However, it’s always a good idea to test a small, inconspicuous area of your puzzle board before applying any natural solvent to ensure that it won’t cause any damage.
Don’t Force the Puzzle Pieces Apart
When removing puzzle glue, it’s important not to force the puzzle pieces apart. If you try to separate the pieces with too much force, you risk damaging the puzzle and ruining its overall appearance. Here are some tips to keep in mind:
- Start by loosening the glue around the edges of the puzzle, using a putty knife or a plastic scraper. Be gentle when doing this and avoid pushing down on the puzzle pieces
- If you encounter a piece that seems particularly stuck, try using a hairdryer to warm up the glue and make it more pliable. This will make it easier to remove the piece without damaging the puzzle
- Try to work on small sections of the puzzle at a time, rather than trying to remove all the glue at once. This will help you to maintain better control over the puzzle pieces and minimize the risk of damage.
- Be patient and take your time. Rushing the glue removal process can lead to frustration and potentially damaging the puzzle pieces.
By taking a gentle and patient approach to removing puzzle glue, you can ensure that your puzzle comes out looking great and is ready for reuse or display!
Be Gentle with Your Puzzle Board
When removing puzzle glue, it’s important to remember that the puzzle board can be delicate and easily damaged. To prevent any harm, be gentle when handling the board. This means avoiding any rough or abrupt movements that could break the board or cause pieces to fall off. Here are some tips for being gentle with your puzzle board:
- Handle the board with care: When removing the puzzle pieces, hold the board with both hands and be cautious when placing it on a flat surface. If the board is flexible or flimsy, place a cardboard backing behind it to provide support.
- Avoid using sharp tools: While a putty knife can be useful for removing excess glue, be careful not to scrape too hard or damage the board’s surface. Instead, try using a soft-bristled brush or a gentle wiping motion with a damp cloth.
- Use gentle cleaning products: Harsh cleaners can scratch or discolor the puzzle board, so stick to gentle solutions like warm water and soap. If you need to use a stronger solvent like acetone or rubbing alcohol, be sure to dilute it before use and test it on a small area first.
- Store the board carefully: Once the glue has been removed, avoid stacking heavy objects on top of the puzzle board or exposing it to extreme temperatures or moisture. This can cause warping or other damage.
By following these tips, you can ensure that your puzzle board remains in good condition and can be reused or displayed for years to come. Remember, a little bit of extra care can go a long way!
Conclusion
After following these steps, your puzzle board should be clean and ready for use or display. It’s important to use the right tools, such as a putty knife and warm water and soap solution, to avoid damaging your puzzle pieces or board. When using solvents like acetone or nail polish remover, be sure to test a small area first to ensure it doesn’t cause any damage or discoloration.
Remember to approach puzzle glue removal with gentle care and patience – forcing puzzle pieces apart can cause damage to both the pieces and the board. Natural solvents like rubbing alcohol or warm water and soap solution are the best options for removing puzzle glue without causing harm.
With these tips and tricks, you can remove puzzle glue easily and efficiently, and enjoy your puzzle time and time again. So don’t let stubborn glue stop you from reusing your puzzle board or displaying your completed masterpiece – follow these steps and get those puzzle pieces cleaned up in no time!
Frequently Asked Questions
How long does it take to remove puzzle glue?
The time it takes to remove puzzle glue depends on the amount of glue used and the method used to remove it. Typically, it can take anywhere from 30 minutes to a few hours to remove puzzle glue.
Can I reuse my puzzle board after removing the glue?
Yes, you can reuse your puzzle board after removing the glue. Following our tips and tricks, you can remove all the glue residue and use the board for your next puzzle.
Is it safe to use acetone to remove puzzle glue?
Yes, it is safe to use acetone or nail polish remover to remove puzzle glue. However, use these solvents in moderation and in a well-ventilated area.
Can I use vinegar to remove puzzle glue?
Vinegar is not the best option to remove puzzle glue. Although vinegar can dissolve some adhesives, it may not be strong enough to remove the glue from puzzle boards.
Can I use a hairdryer instead of a blow dryer to dry my puzzle board?
Yes, you can use a hairdryer to dry your puzzle board. However, it may take longer as hairdryers typically have lower heat settings than a blow dryer.
Can I remove puzzle glue from a cardboard puzzle?
Yes, you can remove puzzle glue from a cardboard puzzle. Follow our tips, but be gentle when removing the glue because cardboard puzzles are not as sturdy as other materials.
Can I use rubbing alcohol to clean a wooden puzzle?
Yes, you can use rubbing alcohol to clean a wooden puzzle. However, be cautious to not let the alcohol sit on the puzzle for too long as it may damage the wood.
Is it necessary to remove all the glue from the puzzle board?
Yes, it is necessary to remove all the glue from the puzzle board because leftover glue residue may affect the shape of future puzzles.
Should I use cold water in the soap solution?
Warm water is preferred as it helps dissolve the glue and any residue. However, if it’s not possible to use warm water, then cold water will do.
How frequently should I remove puzzle glue?
There’s no need to remove puzzle glue after completing each puzzle. Only remove the glue if you want to reuse the board or display the puzzle.