Clamp Type<\/th>\n

Recommended Use<\/th>\n<\/tr>\n

C-Clamp<\/td>\n

Useful for larger pieces or when a lot of pressure is needed.<\/td>\n<\/tr>\n

Spring Clamp<\/td>\n

Good for smaller pieces or when less pressure is needed.<\/td>\n<\/tr>\n

Bar Clamp<\/td>\n

Great for longer pieces, such as pieces of metal tubing.<\/td>\n<\/tr>\n

Vise<\/td>\n

Useful for holding pieces in place while the adhesive dries.<\/td>\n<\/tr>\n<\/table>\n

It is important to note that when clamping, care should be taken not to apply too much pressure, as this can cause the materials to shift or become misaligned. Additionally, it is a good idea to place a piece of scrap wood or other material between the clamps and the materials being bonded to prevent damage or scratches.<\/p>\n

Once the clamps have been applied, it is important to let the adhesive dry and cure completely before removing them. Check the manufacturer’s instructions for recommended drying times, but typically the adhesive will need to dry for at least 24 hours before it is fully cured and the clamps can be removed.<\/p>\n

Proper clamping<\/strong> is an essential step in gluing silicone to metal, as it helps to ensure a strong and durable bond. By selecting the right type of clamp for the job, applying the appropriate amount of pressure, and letting the adhesive dry and cure completely, you can create a long-lasting bond between these two materials. For more information on gluing and adhesives, check out our article on How to Glue Silicon: Tips and Tricks<\/a>.<\/p>\n

Drying and Curing<\/h2>\n
$\"Drying$
\nDrying and Curing<\/strong><\/p>\n
After the adhesive is applied, it’s important to let it dry and cure properly. This step is crucial to ensure that the bond between the silicone and metal is as strong as possible. <\/p>\n
The drying time for silicone adhesives varies depending on the type, brand, and thickness of the layer applied. In general, it’s recommended to let the adhesive dry for at least 24 hours before handling the silicone and metal parts. The curing time for most silicone adhesives can also take up to 24 hours. <\/p>\n
During the drying and curing process, it’s important to keep the area at room temperature and avoid any movement of the glued objects. Constant movement or change in temperature can affect the bond between the surfaces and weaken the adhesive. <\/p>\n
It’s also important to note that silicone adhesives can release acetic acid fumes during the curing process. These fumes can be harmful, so ensure that the area is well-ventilated throughout the curing process. <\/p>\n
Finishing Touches<\/strong><\/p>\n
Once the adhesive is fully cured, you can remove any excess adhesive that may have seeped out of the bonded surfaces. This can be done using a razor blade or sandpaper. Be careful not to scratch the surfaces or damage the bond. <\/p>\n
If desired, you can also sand and paint the surfaces to give a smoother finish. However, make sure to use a paint that is compatible with silicone adhesives, and test a small area first before painting the entire surface. <\/p>\n
Now that you know how to glue silicone to metal, you can take on many projects, from home repairs to DIY crafts. By following these steps, you can ensure a strong and long-lasting bond between the two materials. <\/p>\n
If you want to learn more about different gluing techniques, check out our article on how to glue images to glass cabochons<\/a>. For more information on building with adhesives, read our article on how to build a stitch-and-glue kayak<\/a>.<\/p>\n
Finishing Touches<\/h2>\n
$\"Finishing$
\nAs the gluing process nears its end, there are still important steps that need to be taken to ensure a seamless finish. These final touches<\/strong> will not only enhance the overall appearance of the project but also contribute to its durability. In this section, we will discuss how to remove excess adhesive, sand and paint, and provide tips and tricks to take your project to the next level. Whether you’re gluing silicone to metal for a science fair project or an industrial application, these tips will help you achieve professional results. So, let’s get started! If you’re interested in learning about industrial-strength glue, you can check out this article<\/a>.<\/p>\n
Removing Excess Adhesive<\/h3>\n
After the adhesive has dried and cured, it’s time to remove any excess glue that may be visible. This step is crucial for achieving a polished and professional look. Here are some effective methods for removing excess adhesive: <\/p>\n
\n
Cutting:<\/strong> Using a sharp blade or knife, carefully cut off any excess adhesive that is sticking out. This is a good method for larger areas with excess glue.<\/li>\n
Sanding:<\/strong> Sanding the area with fine-grit sandpaper can help remove any remaining excess adhesive. Make sure to use light pressure to avoid scratching the metal surface.<\/li>\n
Solvent:<\/strong> If the adhesive is still wet, a solvent such as isopropyl alcohol or acetone can be used to dissolve the glue. Apply the solvent with a cotton swab and gently rub the excess glue until it dissolves.<\/li>\n
Heat:<\/strong> Applying heat to the excess glue can soften it, making it easier to remove. Use a heat gun or hairdryer on a low setting to warm the glue, and then scrape it off with a tool such as a plastic scraper or putty knife.<\/li>\n<\/ul>\n
It’s essential to be careful when removing excess adhesive to avoid damaging the metal surface or the silicone bond. It’s also a good idea to test these methods on a small area before applying them to the entire project.<\/p>\n
Once the excess adhesive has been removed, the metal and silicone bond will be more visible. If desired, additional sanding or painting can be done to further enhance the appearance of the project. <\/p>\n
If you’re interested in learning about other adhesive projects, check out our article on How to Glue Rubber Mulch Together<\/a>. Additionally, if you’re curious about the strength of different adhesives, our science fair project on Which Glue is the Strongest?<\/a> may be of interest to you.<\/p>\n
Sanding and Painting<\/h3>\n
Once the adhesive has fully dried and cured, it’s time to put the finishing touches on your project. One common method for achieving a smooth and seamless finish is to sand down any bumps or excess adhesive. <\/p>\n
To do this, use a fine grit sandpaper (220 to 400 grit) and sand gently in a circular motion until the surface is smooth. Be sure to wear protective gloves and a mask to avoid inhaling any dust particles. After sanding, wipe down the surface with a clean, damp cloth to remove any remaining dust.<\/p>\n
If desired, you can also paint over the silicone and metal for a more polished appearance. Choose a paint that is compatible with both materials; acrylic or enamel paints are popular options. Before painting, apply a coat of primer to ensure better adhesion. <\/p>\n
Once the primer has dried, apply your chosen paint in thin, even coats, allowing each coat to fully dry before applying the next. A paintbrush or spray paint can be used depending on the size and shape of the project. <\/p>\n
Note:<\/strong> It’s important to wait until the adhesive and primer have fully cured before painting. Rushing the process can result in bubbles, cracking, or peeling. Also, be sure to work in a well-ventilated area when painting and wear protective gear as necessary. <\/p>\n
Follow these steps for a professional-looking finish that will make your project stand out.<\/p>\n
Tips and Tricks<\/h2>\n
<\/iframe><\/div>\n<p>Struggling to achieve a strong bond between silicone and metal? Check out these tips and tricks to ensure a successful glueing process.<\/p>\n<p><strong>Tip #1: Use a Primer or Activator<\/strong><br \/>\nIf you’re having trouble getting the adhesive to stick to the metal surface, consider using a primer or activator. These products are specifically designed to prepare metal surfaces for bonding with silicone adhesives. Apply a thin layer of the primer or activator before applying the adhesive and allow it to dry completely before continuing the glueing process.<\/p>\n<p><strong>Tip #2: Use a Two-Part Adhesive<\/strong><br \/>\nIf you’re working with metal surfaces that are constantly exposed to moisture or extreme temperatures, a two-part adhesive may be the best option. This type of adhesive consists of a base and a hardener that are mixed together just before use. By mixing the two parts, you create a stronger, more durable bond between the silicone and metal surfaces.<\/p>\n<p><strong>Tip #3: Use a Slow-Curing Adhesive<\/strong><br \/>\nWhen working with larger metal surfaces, such as a car roof, you may want to consider using a slow-curing adhesive. Slow-curing adhesives give you more time to adjust the positioning of the materials before the adhesive dries. This is especially helpful when working with large, heavy objects that are difficult to move once they’ve been placed.<\/p>\n<p><strong>Tip #4: Place the Glued Objects in a Warm Place<\/strong><br \/>\nFor a more effective and quick curing process, consider placing the glued objects in a warm and dry place. The heat will help to speed up the curing process, allowing the adhesive to fully set and dry in a shorter amount of time.<\/p>\n<p><strong>Tip #5: Avoid Applying Too Much Adhesive<\/strong><br \/>\nWhile it may be tempting to use a lot of adhesive to ensure a strong bond, applying too much adhesive can actually weaken the bond. The excess adhesive can create air pockets or other imperfections in the bond, which can compromise its strength. Be sure to follow the manufacturer’s instructions and apply the adhesive in a thin, even layer.<\/p>\n<p>By following these tips and tricks, you can ensure a successful glueing process when joining silicone and metal surfaces. Remember to select the right adhesive, prepare the surfaces properly, apply the adhesive evenly, and be patient during the curing process. With the right approach, you can achieve a strong and long-lasting bond between these two materials.<\/p>\n<h2>Conclusion<\/h2>\n<p>After exploring the different types of silicone adhesives and metal surfaces, as well as the importance of proper preparation and clamping during the gluing process, we can conclude that gluing silicone to metal requires patience and attention to detail. It is important to choose the right adhesive based on the specific project needs and to thoroughly clean and sand the metal surface before applying the adhesive. The clamping process ensures a secure bond and the drying and curing period should be carefully monitored before moving onto finishing touches such as removing excess adhesive and sanding\/painting. <\/p>\n<p>However, even with careful preparation and execution, unexpected issues such as an inadequate bond or adhesive failure can occur. In these cases, it may be necessary to reevaluate the type of adhesive or metal surface and try again. <\/p>\n<p>Overall, while the process of gluing silicone to metal can be challenging, with the right materials, preparation, and approach, it is possible to achieve a strong and lasting bond. It is important to take the time to understand the materials being used and to follow the steps carefully for a successful outcome.<\/p>\n<h2>Frequently Asked Questions<\/h2>\n<h3>1. Can I use any type of silicone adhesive with metal surfaces?<\/h3>\n<p>No, not all types of silicone adhesives are suitable for metal surfaces. It is important to choose an adhesive that is specifically formulated to bond with metal surfaces.<\/p>\n<h3>2. Do I need to sand the metal surface before applying the adhesive?<\/h3>\n<p>Yes, sanding is an important step in preparing the metal surface for bonding. It creates a rough surface for the adhesive to adhere to, which improves the bond strength.<\/p>\n<h3>3. How long does the adhesive take to dry?<\/h3>\n<p>The drying time of the adhesive depends on the type of adhesive and the manufacturer’s instructions. It can range from 24 hours to several days.<\/p>\n<h3>4. How do I remove excess adhesive from the surface?<\/h3>\n<p>You can use a razor blade or a scraper to remove excess adhesive from the surface. Be careful not to damage the bond while removing the excess adhesive.<\/p>\n<h3>5. Can I paint over the bonded surface?<\/h3>\n<p>Yes, you can paint over the bonded surface once the adhesive has cured completely. However, it is important to use paint that is compatible with the adhesive and the metal surface.<\/p>\n<h3>6. Can I use a hairdryer to speed up the drying process?<\/h3>\n<p>No, using a hairdryer or any other heat source can negatively impact the adhesive performance and compromise the bond strength.<\/p>\n<h3>7. How do I choose the right adhesive for my application?<\/h3>\n<p>You can choose the right adhesive by considering the type of metal surface, the temperature range, the desired bond strength, and other material-specific factors. It is recommended to consult the manufacturer’s instructions or seek professional advice for selecting the right adhesive.<\/p>\n<h3>8. How important is proper ventilation during the gluing process?<\/h3>\n<p>Proper ventilation is critical during the gluing process as the fumes from the adhesive can be toxic and harmful to human health. Make sure to work in a well-ventilated area and use protective equipment such as gloves, goggles, and respirators if necessary.<\/p>\n<h3>9. Can I use silicone adhesive to bond metal to plastic?<\/h3>\n<p>Yes, silicone adhesive can be used to bond metal to plastic. However, it is important to choose an adhesive that is compatible with both materials and follow the manufacturer’s instructions carefully. <\/p>\n<h3>10. How long should I leave the clamps on the bonded surfaces?<\/h3>\n<p>The clamping time depends on the type of adhesive and the manufacturer’s instructions. It can range from a few hours to several days. It is important to leave the clamps on until the adhesive has fully cured.<\/p>\n<h2>References<\/h2>\n<ul>\n<li><a href=\"https:\/\/www.reddit.com\/r\/DIY\/comments\/4u2b4l\/what_type_of_glue_will_bond_silicone_to_metal\/\" title=\"What type of glue will bond Silicone to metal? : r\/DIY\" target=\"_blank\" rel=\"noopener\">What type of glue will bond Silicone to metal? : r\/DIY<\/a><\/li>\n<li><a href=\"https:\/\/www.masterbond.com\/applications\/rubber-metal-bonding\" title=\"Rubber to Metal Bonding\" target=\"_blank\" rel=\"noopener\">Rubber to Metal Bonding<\/a><\/li>\n<li><a href=\"https:\/\/www.permabond.com\/resource-center\/silicone-bonding\/\" title=\"Silicone surface preparation and bonding\" target=\"_blank\" rel=\"noopener\">Silicone surface preparation and bonding<\/a><\/li>\n<\/ul>\n","protected":false},"excerpt":{"rendered":"<p>Are you looking for a comprehensive guide on how to glue silicone to metal? The process may seem daunting, but with the right materials and steps, you’ll be able to create a strong and long-lasting bond. Whether you need to attach a silicone gasket to a metal surface or secure a metal component to a … <a title=\"How to Glue Silicone to Metal\" class=\"read-more\" href=\"https:\/\/gluesavior.com\/how-to-glue-silicone-to-metal\/\" aria-label=\"More on How to Glue Silicone to Metal\">Read more<\/a><\/p>\n","protected":false},"author":1,"featured_media":7336,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[28],"tags":[],"class_list":["post-7338","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-epoxy-glue"],"acf":{"test":"","":"","seo_title":"How to Glue Silicone to Metal: A Comprehensive Guide","seo_description":"Learn how to effectively glue silicone to metal with this helpful guide. Get tips and tricks for a successful bond every time!","internal_linking_keywords":""},"yoast_head":"\n<title>How to Glue Silicone to Metal: A Comprehensive Guide<\/title>\n<meta name=\"description\" content=\"Learn how to effectively glue silicone to metal with this helpful guide. Get tips and tricks for a successful bond every time!\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/gluesavior.com\/how-to-glue-silicone-to-metal\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"How to Glue Silicone to Metal: A Comprehensive Guide\" \/>\n<meta property=\"og:description\" content=\"Learn how to effectively glue silicone to metal with this helpful guide. Get tips and tricks for a successful bond every time!\" \/>\n<meta property=\"og:url\" content=\"https:\/\/gluesavior.com\/how-to-glue-silicone-to-metal\/\" \/>\n<meta property=\"og:site_name\" content=\"Glue Savior\" \/>\n<meta property=\"article:published_time\" content=\"2023-05-05T08:14:53+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/gluesavior.com\/wp-content\/uploads\/2023\/05\/understanding-the-materials-glue260.webp\" \/>\n<meta name=\"author\" content=\"Scott Graham\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Scott Graham\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"22 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"WebPage\",\"@id\":\"https:\/\/gluesavior.com\/how-to-glue-silicone-to-metal\/\",\"url\":\"https:\/\/gluesavior.com\/how-to-glue-silicone-to-metal\/\",\"name\":\"How to Glue Silicone to Metal: A Comprehensive Guide\",\"isPartOf\":{\"@id\":\"https:\/\/gluesavior.com\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\/\/gluesavior.com\/how-to-glue-silicone-to-metal\/#primaryimage\"},\"image\":{\"@id\":\"https:\/\/gluesavior.com\/how-to-glue-silicone-to-metal\/#primaryimage\"},\"thumbnailUrl\":\"https:\/\/gluesavior.com\/wp-content\/uploads\/2023\/05\/260.webp\",\"datePublished\":\"2023-05-05T08:14:53+00:00\",\"dateModified\":\"2023-05-05T08:14:53+00:00\",\"author\":{\"@id\":\"https:\/\/gluesavior.com\/#\/schema\/person\/5aee6587b47df1d9a60c9370c78a389a\"},\"description\":\"Learn how to effectively glue silicone to metal with this helpful guide. Get tips and tricks for a successful bond every time!\",\"breadcrumb\":{\"@id\":\"https:\/\/gluesavior.com\/how-to-glue-silicone-to-metal\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/gluesavior.com\/how-to-glue-silicone-to-metal\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/gluesavior.com\/how-to-glue-silicone-to-metal\/#primaryimage\",\"url\":\"https:\/\/gluesavior.com\/wp-content\/uploads\/2023\/05\/260.webp\",\"contentUrl\":\"https:\/\/gluesavior.com\/wp-content\/uploads\/2023\/05\/260.webp\",\"width\":750,\"height\":500},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/gluesavior.com\/how-to-glue-silicone-to-metal\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"\",\"item\":\"https:\/\/gluesavior.com\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Epoxy Glue\",\"item\":\"https:\/\/gluesavior.com\/category\/epoxy-glue\/\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"How to Glue Silicone to Metal\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/gluesavior.com\/#website\",\"url\":\"https:\/\/gluesavior.com\/\",\"name\":\"Glue Savior\",\"description\":\"All You Need to Know About Glue\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/gluesavior.com\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Person\",\"@id\":\"https:\/\/gluesavior.com\/#\/schema\/person\/5aee6587b47df1d9a60c9370c78a389a\",\"name\":\"Scott Graham\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/gluesavior.com\/#\/schema\/person\/image\/\",\"url\":\"https:\/\/gluesavior.com\/wp-content\/uploads\/2022\/11\/cropped-avatar-96x96.jpeg\",\"contentUrl\":\"https:\/\/gluesavior.com\/wp-content\/uploads\/2022\/11\/cropped-avatar-96x96.jpeg\",\"caption\":\"Scott Graham\"},\"sameAs\":[\"https:\/\/gluesavior.com\"],\"url\":\"https:\/\/gluesavior.com\/author\/admin\/\"}]}<\/script>\n","yoast_head_json":{"title":"How to Glue Silicone to Metal: A Comprehensive Guide","description":"Learn how to effectively glue silicone to metal with this helpful guide. Get tips and tricks for a successful bond every time!","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/gluesavior.com\/how-to-glue-silicone-to-metal\/","og_locale":"en_US","og_type":"article","og_title":"How to Glue Silicone to Metal: A Comprehensive Guide","og_description":"Learn how to effectively glue silicone to metal with this helpful guide. Get tips and tricks for a successful bond every time!","og_url":"https:\/\/gluesavior.com\/how-to-glue-silicone-to-metal\/","og_site_name":"Glue Savior","article_published_time":"2023-05-05T08:14:53+00:00","og_image":[{"url":"https:\/\/gluesavior.com\/wp-content\/uploads\/2023\/05\/understanding-the-materials-glue260.webp"}],"author":"Scott Graham","twitter_card":"summary_large_image","twitter_misc":{"Written by":"Scott Graham","Est. reading time":"22 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"WebPage","@id":"https:\/\/gluesavior.com\/how-to-glue-silicone-to-metal\/","url":"https:\/\/gluesavior.com\/how-to-glue-silicone-to-metal\/","name":"How to Glue Silicone to Metal: A Comprehensive Guide","isPartOf":{"@id":"https:\/\/gluesavior.com\/#website"},"primaryImageOfPage":{"@id":"https:\/\/gluesavior.com\/how-to-glue-silicone-to-metal\/#primaryimage"},"image":{"@id":"https:\/\/gluesavior.com\/how-to-glue-silicone-to-metal\/#primaryimage"},"thumbnailUrl":"https:\/\/gluesavior.com\/wp-content\/uploads\/2023\/05\/260.webp","datePublished":"2023-05-05T08:14:53+00:00","dateModified":"2023-05-05T08:14:53+00:00","author":{"@id":"https:\/\/gluesavior.com\/#\/schema\/person\/5aee6587b47df1d9a60c9370c78a389a"},"description":"Learn how to effectively glue silicone to metal with this helpful guide. Get tips and tricks for a successful bond every time!","breadcrumb":{"@id":"https:\/\/gluesavior.com\/how-to-glue-silicone-to-metal\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/gluesavior.com\/how-to-glue-silicone-to-metal\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/gluesavior.com\/how-to-glue-silicone-to-metal\/#primaryimage","url":"https:\/\/gluesavior.com\/wp-content\/uploads\/2023\/05\/260.webp","contentUrl":"https:\/\/gluesavior.com\/wp-content\/uploads\/2023\/05\/260.webp","width":750,"height":500},{"@type":"BreadcrumbList","@id":"https:\/\/gluesavior.com\/how-to-glue-silicone-to-metal\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"","item":"https:\/\/gluesavior.com\/"},{"@type":"ListItem","position":2,"name":"Epoxy Glue","item":"https:\/\/gluesavior.com\/category\/epoxy-glue\/"},{"@type":"ListItem","position":3,"name":"How to Glue Silicone to Metal"}]},{"@type":"WebSite","@id":"https:\/\/gluesavior.com\/#website","url":"https:\/\/gluesavior.com\/","name":"Glue Savior","description":"All You Need to Know About Glue","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/gluesavior.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Person","@id":"https:\/\/gluesavior.com\/#\/schema\/person\/5aee6587b47df1d9a60c9370c78a389a","name":"Scott Graham","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/gluesavior.com\/#\/schema\/person\/image\/","url":"https:\/\/gluesavior.com\/wp-content\/uploads\/2022\/11\/cropped-avatar-96x96.jpeg","contentUrl":"https:\/\/gluesavior.com\/wp-content\/uploads\/2022\/11\/cropped-avatar-96x96.jpeg","caption":"Scott Graham"},"sameAs":["https:\/\/gluesavior.com"],"url":"https:\/\/gluesavior.com\/author\/admin\/"}]}},"_links":{"self":[{"href":"https:\/\/gluesavior.com\/wp-json\/wp\/v2\/posts\/7338","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/gluesavior.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/gluesavior.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/gluesavior.com\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/gluesavior.com\/wp-json\/wp\/v2\/comments?post=7338"}],"version-history":[{"count":0,"href":"https:\/\/gluesavior.com\/wp-json\/wp\/v2\/posts\/7338\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/gluesavior.com\/wp-json\/wp\/v2\/media\/7336"}],"wp:attachment":[{"href":"https:\/\/gluesavior.com\/wp-json\/wp\/v2\/media?parent=7338"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/gluesavior.com\/wp-json\/wp\/v2\/categories?post=7338"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/gluesavior.com\/wp-json\/wp\/v2\/tags?post=7338"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}

Discover Top 3 Glue Bestsellers<\/h2>No products found.<\/p><\/div>\n

Discover Top 3 Glue Bestsellers<\/h2>
No products found.<\/p><\/div>\n