Reviving Your Drying Lash Glue Made Easy

It’s a frustrating feeling when you’re about to apply your favorite false lashes and realize your lash glue has dried out. You may wonder what went wrong and whether you should toss your favorite glue or find ways to make it workable again. But worry not, because with a few tips and tricks, you can revive your dried-up lash glue and get those long, luscious lashes back on fleek. In this article, we’ll explore the reasons why lash glue dries out, and provide you with helpful tips and tricks to make it liquid again. So, let’s dive in and discover how to restore your lash glue to its former glory!

Why Does Lash Glue Dry Out?

Why Does Lash Glue Dry Out?
Reasons Why Lash Glue Dries Out

Lash glue is formulated to dry out quickly to ensure that the lashes stay in place for as long as possible. However, there are many reasons why lash glue may dry out completely or faster than it should. One of the most common reasons is the inability to store it properly. Moisture from both the air and the lash glue user’s environment can cause the glue to dry out. Direct sunlight, excessive heat, and cold temperatures in the area where the glue is stored can also cause the adhesive to dry out faster.

Apart from inadequate storage, another reason why lash glue dries out its typical chemical composition. Most lash glue contains cyanoacrylate, which becomes dry once exposed to air. Extended periods of exposure to air during storage will dry out the adhesive. In some cases, improper bonding could also be the reason for lash glue’s dryness. If the lash glue isn’t bonding well enough to the lash or the lid, the user might be tempted to apply more glue, causing the tube to dry out faster than usual.

It’s also possible that the user is not closing the glue cap correctly or not storing it in a vertical position, which can cause the glue to clog or dry out. Sometimes, the adhesive may have expired, so using an old tube of lash glue may also result in a dry product.

It’s essential to be aware of the above reasons for dried-out lash glue. It can be frustrating to have to throw it away and purchase a new tube due to inadequate storage or loss of the cap. Understanding how to keep your lash glue in good condition will ensure that it lasts for an extended period. You can learn more about how to make lash glue last longer in our other post. Click here to read.

How to Make Lash Glue Liquid Again: Tips and Tricks

How To Make Lash Glue Liquid Again: Tips And Tricks
If you’re an avid fan of false lashes, then you know how frustrating it is when your lash glue dries out. It can be especially disappointing when you’re in a rush to get ready for an event or important meeting. However, fear not! There are some easy tips and tricks you can use to make your lash glue liquid again. Whether you’re a makeup artist or an enthusiast, these tips will help you revive your dry lash glue and ensure a smooth and seamless application. So, without further ado, let’s dive in and see how to bring your lash glue back to life! Also, if you are curious about how long does lash glue last, check out our article on that topic.

Tip #1: Store your Lash Glue Tubes Properly

Proper storage of lash glue tubes is crucial in preventing them from drying out too quickly. Here are some useful tips to ensure your lash glue stays fresh and in good condition:

  • Store your lash glue in a cool, dry place: Direct exposure to sunlight, heat, and humidity can lead to premature drying of your lash glue. Heat and humidity cause the glue to break down and lose its adhesive properties. Always store your lash glue in a cool, dry place, such as a drawer or cupboard away from direct sunlight and heat sources.
  • Keep the lid tightly closed: Lash glue dries out quickly when exposed to air, so make sure to keep the lid tightly closed after use. This will extend the life of your lash glue, prevent it from drying out too quickly, and save you money in the long run.
  • Store your lash glue upright: Lash glue tubes are designed to be stored upright, with the lid facing upwards. Storing your lash glue in this position will ensure that the glue is distributed evenly throughout the tube and prevent it from drying up at the tip of the tube.
  • Check the expiry date: Lash glue has a shelf life of around six months to a year, depending on the brand. Check the expiry date on your lash glue tube and make sure to use it before it expires. Using expired lash glue can cause irritation, allergic reactions, and poor adhesive performance.

By following these storage tips, you can prevent your lash glue from drying out too quickly and ensure that it stays fresh and effective for longer.

If you’re looking for more information on lash glue, you may be interested in how to store lash glue or when does lash glue expire.

Tip #2: Warm up Your Lash Glue Tubes

One of the easiest ways to make your lash glue liquid again is to warm it up. Warming up your lash glue tube can make the adhesive more liquid-like and easier to apply. But, it’s important to warm the lash glue slowly and at a low temperature to prevent any risk of damaging the glue or burning yourself.

To warm up your lash glue tubes, here are the steps to follow:

Step 1: Boil some water and pour it into a bowl.
Step 2: Place your lash glue tube into a plastic bag and seal it.
Step 3: Place the bag with the lash glue into the bowl of hot water.
Step 4: Allow the glue to warm up for 5 minutes.
Step 5: Remove the lash glue tube from the hot water and test it on a surface. If it’s still too thick, repeat the process.

Warming up lash glue can be a game-changer for lash artists or anyone who uses individual lashes. It’s important to note that heating the glue too much can change its consistency and make it unusable, so always take caution while performing this method.

Pro tip: If you’re using a clear adhesive and see that it’s turning white when you glue your lashes, be cautious and consider using a different glue. Some adhesives cannot withstand heat and humidity, which causes them to turn white. In this case, you should avoid heating the glue, as it can further affect the consistency and adhesiveness of the product.

If you’re looking for a lash glue brand that won’t turn white even when it’s humid, check out this article to find the right adhesive for you.

Tip #3: Add a Few Drops of Saline Solution

When your lash glue dries out, it’s frustrating to have to purchase a new one. However, with a few tips and tricks, you can make lash glue liquid again. One popular method is to add a few drops of saline solution to the glue.

Saline solution is a mixture of salt and sterile water that can be used for various purposes. When added to dry lash glue, it can effectively revive its liquidity. Here’s how to do it:

  1. Get your saline solution ready.
  2. Open your lash glue tube.
  3. Add a few drops of saline solution into the lash glue container. Remember, do not add too much. Two to three drops are just enough. If you put too much, it will dilute the glue and affect its sticking power.
  4. Close the lash glue tube and give it a good shake to mix the saline solution with the glue.
  5. Wait for a few minutes to see if the consistency is okay. If it’s still too thick, add one more drop of saline solution and mix again. Keep repeating until you get your desired consistency.

It’s important to note that this method may not work for all types of lash glue. Some brands may have different formulas that react negatively with saline solution. Additionally, if your lash glue is already expired, this method may not work either.

Using saline solution to make lash glue liquid again is a quick and easy solution to a common problem. However, if you find that this method doesn’t work for you, consider trying other tips and tricks or investing in a different lash glue brand that suits your needs.

If you’re wondering about the longevity of your duo individual lash glue, you may want to check How Long Does Duo Individual Lash Glue Last?. Or, if you’re still unsure about what kind of glue to use for individual lashes, you can read What Glue to Use for Individual Lashes?. For more information about lash glue, check out Why Is My Lash Glue Turning White? and How to Make Lash Glue.

Tip #4: Use a Tiny Bit of Petroleum Jelly

When it comes to making lash glue liquid again, using petroleum jelly might not be the first thing that comes to mind. However, it can be a simple and effective solution to revive thicker lash glue formulas. Here are some steps on how to use petroleum jelly to make your lash glue liquid again:

  1. Start by squeezing a small amount of your lash glue onto a clean surface.
  2. Add a tiny amount of petroleum jelly (about the size of a pea) to the glue and mix well using a toothpick or cotton swab.
  3. If the texture is still too thick, add another small amount of petroleum jelly and mix again.
  4. Test the consistency of the glue on a strip lash or on the back of your hand to see if it’s been revived to the desired consistency.

One thing to keep in mind when using petroleum jelly: only add a very small amount as adding too much can affect the adhesion and longevity of the lash glue. It’s important to strike the right balance between making the lash glue liquid enough without compromising its effectiveness.

While using petroleum jelly to make lash glue liquid again is an effective method, keep in mind that it may not work for all lash glue formulas. Additionally, it’s important to note that this method may not be suitable for individuals with sensitive skin.

If you’re unsure about using petroleum jelly, there are other options to consider such as using lash glue thinner or warming up your lash glue tubes. You can find more tips and tricks on how to make your lash glue liquid again in the previous sections.

Remember, finding the right solution to make your lash glue liquid again may require some trial and error. Don’t be afraid to try out different methods until you find the right one that works for you.

And in case you’re unsure of what to use as lash glue, check out our previous article on what to use as lash glue.

Tip #5: Use Lash Glue Thinner

Lash glue thinner is a handy product for thinning out your lash glue that has dried up. It’s a must-have item for anyone who uses false lashes on a regular basis. If your lash glue has become too thick or clumpy, using a lash glue thinner can bring it back to its former consistency. Here are some essential points to keep in mind when using lash glue thinner:

  • Step 1: Start by adding just a few drops of lash glue thinner to your dried-up lash glue.
  • Step 2: Use a small brush or toothpick to mix the thinner into the glue.
  • Step 3: Keep adding lash glue thinner in small increments, mixing continuously until the glue reaches your desired consistency.
  • Step 4: Take care not to add too much thinner at once, as this can make the glue too thin and runny, and it may not hold false eyelashes effectively.
  • Step 5: Always mix thoroughly to avoid any lumps or clumps in the glue.

It’s important to note that lash glue thinner should only be used with lash glue, and not substituted with other thinning agents. Using the wrong product can cause your lash glue to break down and lead to poor adhesion, resulting in your false lashes falling off throughout the day. Always check the manufacturer’s instructions to ensure you’re using the right product for your lash glue, and keep your lash glue thinner in a cool, dry place as directed.

Tip #6: Use a Microwave

If your lash glue tube is still not in liquid form after trying the previous tips, you can try using a microwave to revive it. However, be extremely cautious as this method requires more attention and care. Follow the steps below:

Step Procedure
Step 1 Remove the cap from the lash glue tube and pour a small amount of the glue into a microwave-safe container.
Step 2 Place the container with the lash glue in the microwave. Note that the glue should not be exposed to high temperatures for an extended period of time. Begin by heating the glue for no more than 5 seconds on a low power setting.
Step 3 Take out the container and gently swirl or stir the glue to ensure that it is evenly heated. Repeat step 2 if the glue is not liquid enough. However, avoid overheating the glue as this can cause the adhesive to break down and become ineffective.
Step 4 Now that the glue is in a liquid form, transfer it back into the glue tube using a small funnel or spoon. Close the cap tight and shake the tube until the contents are well mixed.

Using a microwave to revive lash glue can be effective, but it’s essential to be very careful because overheating can ruin the adhesive properties of the glue. Remember to only heat the glue for short amounts of time, and never allow it to get too hot. Be sure to mix the glue well after heating it, and use it right away for optimal results.

Tip #7: Try a Different Lash Glue Brand

If you have tried all the previous tips and tricks but your lash glue is still dried out, it might be time to switch to a different brand. There are a lot of different factors that can affect how quickly your lash glue dries out, including the climate you live in, the humidity levels in your home, and even your body chemistry. Some lash glue brands might simply work better for you than others.

When looking for a new lash glue brand, it’s important to do your research and read reviews from other lash enthusiasts. Look for a brand that has a reputation for staying liquid for a long time and providing a strong hold. You might also want to consider trying a different type of lash glue, such as a brush-on or clear adhesive, to see if that works better for your needs.

However, it’s important to keep in mind that switching lash glue brands might not be a foolproof solution. Some lash glues might simply dry out faster than others, and a different brand might not solve the problem entirely. That’s why it’s always a good idea to continue practicing proper storage techniques and trying out different tips and tricks to keep your lash glue liquid for as long as possible.

Remember, finding the perfect lash glue can often be a process of trial and error. Don’t get discouraged if your first few tries don’t work out. Keep experimenting with different brands, techniques, and storage methods until you find the one that works best for you.

Things to Avoid When Reviving Lash Glue

When it comes to reviving lash glue, there are certain things that should be avoided in order to prevent any damage to the adhesive or eyelashes themselves.

Avoid using water
Water can cause the lash glue to break down and lose its adhesive properties. Never add water to your lash glue in an attempt to revive it.

Avoid using oils
Oils can also break down the lash glue and make it less effective. This includes any oil-containing products such as coconut oil, olive oil, or castor oil.

Avoid using alcohol
Although alcohol can be used to clean the eyelashes, it should never be added to lash glue. Alcohol can cause the adhesive to become too brittle and dry, making it less effective.

Avoid exposing the lash glue to direct heat
Exposing the lash glue to direct heat sources such as hairdryers or heaters can cause it to break down and become ineffective. Do not attempt to heat up the glue with a hairdryer or by leaving it in a hot car.

Avoid shaking the glue vigorously
Shaking the glue vigorously can introduce air bubbles, which can weaken the adhesive properties of the glue.

Following these simple precautions can help prevent any damage to your eyelashes and ensure that your lash glue remains effective and safe to use.

Conclusion

As we conclude our discussion on how to make lash glue liquid again, it’s important to highlight the various tips and tricks that we’ve covered. We hope that you found this article helpful in reviving your dried-up lash glue and that you’re now able to create stunning lash looks with ease. Remember to exercise caution when trying out these tips and always follow the instructions included with your lash glue product to ensure optimal results. With these tips, you’ll be able to extend the life of your lash glue and keep your falsies looking fresh for longer!

Final Thoughts

As we conclude this article on how to make lash glue liquid again, it is important to remember that prevention is key when it comes to keeping your lash glue from drying out. Make sure to always store your lash glue tubes properly, away from direct sunlight, and at room temperature.

However, if you do find yourself with a dried-out lash glue tube, don’t stress! Our tips and tricks have got you covered. Consider warming up your lash glue tube, adding a few drops of saline solution, using a tiny bit of petroleum jelly, or even trying a different lash glue brand.

But remember to avoid:

  • Adding water to your lash glue
  • Microwaving your lash glue for too long
  • Using products not specifically designed for lash glue thinning

By following these tips and avoiding the common mistakes, you can save money, time, and hassle by reviving your lash glue and having it work like new again. Don’t give up on that beloved lash glue just yet!

So, experiment with our tips and tricks and enjoy using your favorite lash glue continuously!

Follow Our Tips and Tricks

Here are the tips that you can follow to ensure that your lash glue is made liquid again:

  • Store your Lash Glue Tubes Properly: Make sure that you store your lash glue tubes in a cool, dry place that is away from direct sunlight. This can help prevent the glue from drying out prematurely and keeps it fresh for longer periods.
  • Warm up Your Lash Glue Tubes: If you’ve tried to store your lash glue properly and it still dried out, you can warm up the glue tube by placing it in a bowl of hot water for a few minutes. This can help liquefy the glue and make it usable again.
  • Add a Few Drops of Saline Solution: Another way to make your lash glue liquid again is by adding a few drops of saline solution to the tube. Saline solution is an excellent option to keep the glue from becoming too runny. It also helps prevent irritation to your eyes which can be caused by using harsh chemicals for thinning the glue.
  • Use a Tiny Bit of Petroleum Jelly: Using a tiny bit of petroleum jelly can help soften the glue and make it easier to apply. Simply add a tiny bit of petroleum jelly to the brush or applicator and mix it with the glue.
  • Use Lash Glue Thinner: If you’re looking for a more effective option to make your lash glue liquid again, try using a lash glue thinner. Lash glue thinner is specifically designed for softening the glue and making it easy to use.
  • Use a Microwave: You can also use a microwave to melt down your dry lash glue. Place the lash glue tube in a microwave-safe bowl. Put the bowl in the microwave for a few seconds. It will help liquefy the glue but make sure you monitor it closely to avoid overheating and ruining the glue.
  • Try a Different Lash Glue Brand: If you’ve tried all these tips and your glue still doesn’t work, you may want to try another lash glue brand. Some brands may work well and may help you avoid having to go through the process of reviving your glue.

By following these tips and tricks, you’ll be able to make your lash glue liquid again and save money by not having to replace it. Keep in mind that these tips are not fool-proof, so always check the ingredients before trying them to ensure that they won’t cause any adverse reactions.

Frequently Asked Questions

What is lash glue?

Lash glue is an adhesive used to attach false eyelashes to the natural eyelashes.

Why does lash glue dry out?

Lash glue can dry out due to exposure to air, changes in temperature or humidity, or simply from normal use over time.

Can I still use my dried-out lash glue?

It is not recommended to use dried-out lash glue as it may not adhere properly to the lashes and can cause irritation or damage to the eyes.

What is lash glue thinner?

Lash glue thinner is a specially formulated solution designed to restore dried-out lash glue to its original consistency.

Can I store my lash glue in the fridge?

No, storing lash glue in the fridge can cause condensation to form inside the tube, which can affect its adhesive properties and cause clumping.

How can I warm up my lash glue?

You can warm up your lash glue by placing the unopened tube in warm water for a few minutes or by holding it between your palms to generate some heat.

What is petroleum jelly and how does it help revive lash glue?

Petroleum jelly is a thick, oily substance that can help hydrate and soften dried-out lash glue when applied in small amounts.

Is it safe to use a microwave to revive lash glue?

No, using a microwave to revive lash glue can cause the adhesive to overheat and lose its effectiveness, as well as create potential safety hazards.

What should I do if none of these tips work to revive my lash glue?

If none of these tips work to revive your lash glue, it may be time to purchase a new tube of lash glue from a different brand or supplier.

Can using the wrong lash glue cause irritation or damage to my eyes?

Yes, using the wrong lash glue or using lash glue improperly can cause irritation, allergic reactions, or even damage to your natural lashes or eyes. It’s important to follow proper safety guidelines and choose a high-quality, reliable lash glue for best results.

References

Leave a Comment