The back cover of your phone is one of the most important components that protects the internal parts from external damage. It not only gives your phone a sleek look but also prevents it from scratches, unnecessary exposure to dirt, and provides a stronger grip for a better user experience. However, accidents can happen, and the back cover might break or crack over time, posing a risk to your phone’s safety. Instead of spending money on a new phone or a replacement cover, you can fix this issue yourself by gluing the phone back cover. It seems daunting at first, but with the right tools and techniques, you can do it with ease. In this guide, we will walk you through the step-by-step process of how to glue the phone back cover and give additional tips to make it easier.
Why Glue Your Phone Back Cover?
If you have a cracked phone back cover, it is essential to glue it back together to avoid further damage to your device. Using a strong adhesive glue can help restore the structural integrity of your phone’s back cover. However, it is crucial to be careful while gluing your phone back cover to avoid any damage. In this guide, we’ll take a look at the precautions you need to take before gluing the back cover, the tools you’ll need, and a step-by-step process for gluing your phone back cover. Let’s dive in and learn how you can glue your phone back cover like a pro.
Precautions
When gluing your phone back cover, it is important to take certain precautions to avoid costly mistakes. Here are some things to keep in mind:
- Make sure to turn off your device before attempting to remove the back cover. This will prevent any accidental damage and keep you safe.
- Use caution when removing the old adhesive. Depending on the type of adhesive used, it may be necessary to use a heat gun or hair dryer to loosen it. Be sure to wear gloves and work in a well-ventilated area to avoid inhaling any fumes or getting burned.
- Be gentle when cleaning the phone housing. Use a soft cloth and a mild solvent such as rubbing alcohol to remove any residue. Avoid using anything abrasive that could scratch the surface of your phone.
- Apply the new adhesive carefully. Too much adhesive can result in a messy, uneven seal that may not hold up over time. On the other hand, too little adhesive may not provide enough adhesion to keep your phone cover securely in place.
By following these precautions, you can increase your chances of success when gluing your phone back cover. If you’re unsure about which adhesive to use for your specific phone model, be sure to do some research beforehand. You can also check out other helpful articles related to gluing, such as What Glue to Use on Ceramic Mug or What is the World’s Strongest Glue for more information.
Tools You’ll Need
For successfully gluing your phone’s back cover, you’ll need to gather the necessary tools beforehand. Having all the tools within reach before you start will help streamline the process and prevent any last-minute interruptions. Here are the tools you’ll need to have on hand while gluing your phone’s back cover:
| Tools | Details |
|---|---|
| Adhesive remover | This solution is required to remove the leftover adhesive from the previous cover. You can use rubbing alcohol instead of adhesive remover as well. |
| Microfiber cloth | A soft and lint-free cloth is an essential tool to clean the surface of the phone. |
| Plastic scraper | Plastic scrapers are an ideal tool for removing the excess adhesive as they do not scratch the delicate phone surface. |
| Tweezers | Use tweezers to place the adhesive onto the phone and to hold it in place while it dries. |
| Adhesive | You’ll need adhesive to attach the new back cover to your phone. We recommend using a strong adhesive for optimal results. If you’re unsure about which adhesive to use, read our article on Epoxy versus Wood Glue strength. |
It’s crucial to have all the necessary tools on hand to avoid any inconvenience. Some of the tools needed, such as adhesive remover and microfiber cloth, are readily available at home, while others like adhesive may have to be purchased. It’s worth investing in high-quality adhesive to ensure your phone’s back cover stays securely attached for an extended period.
How to Glue Your Phone Back Cover
Now that you have gathered all the necessary tools and taken the proper precautions, it’s time to learn how to glue your phone back cover. This step-by-step guide will help you achieve a strong and seamless bond that will keep your phone cover in place. Whether you have an iPhone, Samsung, or any other type of mobile device, these instructions will work for you. So let’s get started and bring your phone back to its former glory! And if you want to learn more about gluing, check out this article on how to use Bondic glue.
Step 1: Remove the Old Adhesive
When removing the old adhesive from your phone’s back cover, it’s important to use caution so as not to damage the cover or any of the delicate components inside the phone. Here are the steps to safely and effectively remove the old adhesive:
- Step 1: Use a heat gun or hair dryer to loosen the adhesive. Hold the device on a flat surface and aim the heat source towards the edges of the back cover. Be sure to keep the heat source at least 5-6 inches away from the device to avoid damaging any internal components. You may also want to wear gloves at this stage to protect your hands from the heat.
- Step 2: Once the adhesive has been loosened, use a plastic pry tool or a credit card to gently lift the cover from the phone. Try to avoid using metal tools as they can potentially scratch the phone’s housing or damage the cover itself.
- Step 3: Use a cleaning solution or rubbing alcohol to remove any leftover adhesive residue from the phone’s housing. Be sure to apply the solution to a microfiber cloth rather than directly to the phone to avoid any potential liquid damage.
- Step 4: Inspect the back cover for any cracks or damages. If necessary, use an appropriate adhesive to fix any cracks or breaks. Check out our article on How to Glue Cracked Glass for tips on how to fix cracks in glass, or How to Glue a Hairline Crack in Wood if your phone cover is made of wood.
Remember to take your time during this step and be gentle with your phone to avoid any potential damage. With the old adhesive removed, you’re now ready to move on to the next step in the process, cleaning the phone housing.
Step 2: Clean the Phone Housing
To ensure that the new adhesive will stick properly, it’s important to clean the phone housing thoroughly. Step 2 requires a bit of manual effort, but it’s necessary for the success of the repair.
Here’s how to clean the phone housing:
| Tools You’ll Need: | Instructions: |
|---|---|
| Cotton swabs | Take a cotton swab and dip it in rubbing alcohol. |
| Rubbing alcohol | Make sure the cotton swab is wet but not dripping. |
| Microfiber cloth | Gently rub the phone housing with the wet cotton swab. Make sure to cover every nook and cranny to remove any dirt or debris that could interfere with the adhesive. |
| Dry the phone housing with a microfiber cloth before moving on to the next step. |
It’s essential to use rubbing alcohol as it evaporates quickly, leaving no residue. Using a microfiber cloth to dry the phone housing ensures that no lint or fibers get stuck on it.
Take time to clean the phone housing properly to ensure a successful repair. Once the housing has been cleaned and dried, move on to the next step and apply the new adhesive.
Remember, if you’re unsure of what type of adhesive to use or how to use it, check out some of our other articles on gluing different materials, such as how to glue limestone together, how to glue Lexan, how to glue broken sandstone, or how to glue wood at 90 degree angle.
Step 3: Apply the New Adhesive
Once the housing of the phone is cleaned thoroughly, the next step is to apply new adhesive. This is a crucial step in the process as improper application can result in the back cover falling off again.
To apply the new adhesive, you will need a high-quality adhesive specifically designed for phone repairs. You can visit a local electronics store or purchase one online. Here are the steps to apply the adhesive:
| Step | Description |
|---|---|
| 1 | Apply the adhesive evenly: Start by applying a thin, even layer of adhesive on the housing of the phone. Avoid applying too much adhesive as it can cause the back cover to stick improperly. |
| 2 | Align the back cover: Once the adhesive is applied, align the back cover with the housing of the phone. Make sure that the camera lens and other openings are properly aligned. |
| 3 | Press the back cover: Once the back cover is aligned, press it firmly down to ensure that the adhesive sticks properly. Apply pressure for at least a minute to ensure proper adherence. |
| 4 | Let it dry: Leave the phone for at least 30 minutes to ensure that the adhesive is completely dry. It’s best to leave it for a longer period if possible. |
It’s important to note that different types of adhesive may have varying drying times, so be sure to check the instructions provided with the adhesive you are using.
Once the adhesive is dry, your phone back cover should be securely glued in place. However, if you notice any looseness or improper adherence, try repeating the process or consider using a different type of adhesive for better results.
Additional Tips and Tricks
As you work to glue your phone back cover, it’s important to keep a few extra tips and tricks in mind. These helpful hints can make the process smoother and ensure your phone’s back cover stays in place for the long haul. Take a look at the following advice, and consider using one or more of these strategies to make your gluing job more effective and efficient.
Using Epoxy for Stronger Adhesion
If you want to ensure that your phone’s back cover stays securely in place, then using epoxy is a great option for achieving a stronger adhesion. Epoxy is a two-part adhesive that results in a very strong and durable bond. Here are some steps to follow when using epoxy for gluing your phone back cover:
| Step | Instructions |
|---|---|
| Step 1 | Prepare the epoxy by mixing the two parts together according to the manufacturer’s instructions. Make sure to wear gloves and work in a well-ventilated area as epoxy can be harmful if inhaled or if it comes into contact with skin. |
| Step 2 | Apply a thin layer of the mixed epoxy to both the phone housing and the back cover using a small paintbrush or toothpick. Make sure to apply the epoxy evenly and avoid getting it on any important components or ports. |
| Step 3 | Press the back cover firmly into place on the phone housing. Use clamps or weights to hold the cover in place while the epoxy dries if needed. |
| Step 4 | Allow the epoxy to dry completely according to the manufacturer’s instructions. This may take a few hours or overnight, depending on the product. |
Important note: Epoxy can be more difficult to remove than other adhesive options, so make sure you’re certain you want to use it before applying it to your phone.
Using epoxy for gluing your phone’s back cover is a great option if you’re looking for a stronger and more durable bond. However, it’s important to follow the above steps carefully and take the necessary precautions to ensure your safety while working with this adhesive.
Using a Hair Dryer to Speed Up Drying Time
When using adhesive to glue your phone back cover, it is important to wait for it to dry completely before using your phone again. However, waiting for the adhesive to dry naturally can take a lot of time. To speed up the process, you can use a hair dryer.
How to Use a Hair Dryer to Speed Up Drying Time
| Step | Instructions |
|---|---|
| Step 1 | Apply the adhesive to the phone back cover. |
| Step 2 | Place the phone back cover onto the phone housing. |
| Step 3 | Use a hair dryer on the cool setting to blow air around the edges of the phone back cover. |
| Step 4 | Gradually increase the heat setting of the hair dryer and continue to blow air around the edges of the phone back cover. |
| Step 5 | Hold the hair dryer 6 to 8 inches away from the phone back cover and move it around to evenly distribute the heat. |
| Step 6 | Continue to blow hot air until the adhesive dries completely. |
It is important to use the cool setting at first and gradually increase the heat to avoid damaging your phone with too much heat. Be sure to keep the hair dryer at a safe distance and keep it moving to avoid overheating one area of the phone. With these precautions in mind, using a hair dryer to speed up drying time can be a great way to get your phone back in working order faster.
Conclusion
After following these easy steps, you should have successfully glued your phone’s back cover back on. It’s important to remember that you should take all the necessary precautions before attempting to glue your phone back cover. Ensuring a clean and dry work surface is essential to keeping your phone from any future damage.
Remember: When attempting any DIY repairs on your phone, always be careful and take your time. Rushing can often lead to further damage or mistakes. If you’re worried about damaging your phone, it’s always better to seek professional help.
Overall, regluing your phone’s back cover is not a difficult task, and it can save you money in repair costs. Be sure to use the right adhesive and tools, and take your time to make sure everything is done correctly. With these tips and tricks, you should be able to successfully glue your phone back cover back on and have it looking like new again!
Frequently Asked Questions
Can I use any type of adhesive?
No, not all adhesives are suitable for phone back covers. It’s important to choose an adhesive that is strong and dries clear, such as B7000 or E6000.
What if there is still adhesive residue left on the phone housing?
You can use rubbing alcohol or adhesive remover to remove any remaining adhesive residue. Be sure to let it fully dry before applying new adhesive.
How long does it take for the new adhesive to dry?
The drying time can vary depending on the type of adhesive used. It’s important to read and follow the instructions on the adhesive packaging for optimal results.
Can I still use my phone while the adhesive is drying?
We do not recommend using your phone while the adhesive is drying. This could cause the back cover to shift or move, which could impact the quality of the bond.
Is it safe to apply heat to the phone housing?
It’s generally safe to use a hair dryer on low heat to help the adhesive dry faster. However, be sure to avoid using high heat or prolonged exposure to heat as it could damage your phone.
Do I need to apply the new adhesive to the entire back cover?
No, you only need to apply the adhesive to the areas where the old adhesive has been removed.
Can I reuse the old adhesive?
No, we do not recommend reusing old adhesive. It’s important to use new adhesive to ensure a strong and secure bond.
How long will the new adhesive last?
If applied properly, the new adhesive should last for several months. However, frequent use and exposure to heat can impact the longevity of the bond, so it’s important to periodically check the back cover and reapply adhesive if necessary.
What if the back cover still doesn’t stick after applying new adhesive?
If the back cover still doesn’t stick, it’s possible that the phone housing or back cover may be damaged or warped. In this case, it’s best to consult a professional or replace the back cover entirely.
Is it safe to remove the back cover of my phone?
If done properly and with caution, removing the back cover of your phone should be safe. However, if you’re unsure or uncomfortable with performing this task, we recommend seeking assistance from a professional.